2108/393036 - 2024 -
Effect of the LEO space environment on the functional performances of shape memory polymer composites Santo, Loredana; Quadrini, Fabrizio; Bellisario, Denise; Iorio, Leandro; Proietti, Alice - 01 - Articolo su rivista
rivista: COMPOSITES COMMUNICATIONS ([Oxford] : Elsevier Ltd.) pp. - - issn: 2452-2139 - wos: WOS:001233261900001 (2) - scopus: 2-s2.0-85190800719 (2)
2108/393037 - 2024 -
Shape memory polymer composite hinges for solar sails Iorio, Leandro; Quadrini, Fabrizio; Santo, Loredana - 01 - Articolo su rivista
rivista: ADVANCES IN SPACE RESEARCH (Elsevier Science Limited:Oxford Fulfillment Center, PO Box 800, Kidlington Oxford OX5 1DX United Kingdom:011 44 1865 843000, 011 44 1865 843699, EMAIL: asianfo@elsevier.com, tcb@elsevier.co.UK, INTERNET: http://www.elsevier.com, http://www.elsevier.com/locate/shpsa/, Fax: 011 44 1865 843010) pp. 3201-3215 - issn: 0273-1177 - wos: WOS:001297816000001 (0) - scopus: 2-s2.0-85199129894 (0)
2108/393034 - 2024 -
Repairing of recycled hybrid carbon fiber laminates Proietti, Alice; Quadrini, Fabrizio; Santo, Loredana - 01 - Articolo su rivista
rivista: POLYMER COMPOSITES (Society of Plastics Engineers:14 Fairfield Drive, PO Box 0403:Brookfield, CT 06804:(203)775-0471, INTERNET: http://www.4spe.org, Fax: (203)775-8490) pp. - - issn: 0272-8397 - wos: WOS:001296192200001 (0) - scopus: 2-s2.0-85201973023 (0)
2108/393033 - 2024 -
Manufacturing of shape memory foams in hypergravity and simulated microgravity Santo, Loredana; Iorio, Leandro; Proietti, Alice; Bellisario, Denise; Quadrini, Fabrizio - 03 - Contributo in libro
libro: Materials forming: the 27th international ESAFORM conference on materials forming (ESAFORM 2024) - (9781644903131)
2108/393035 - 2024 -
Anisogrid lattice structure in thermoplastic composite by filament gun deposition Quadrini, Fabrizio; Santo, Loredana - 01 - Articolo su rivista
rivista: PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS. PART C, JOURNAL OF MECHANICAL ENGINEERING SCIENCE (Professional Engineering Publications:PO Box 24 Northgate Avenue, Bury St. Edmunds, IP32 6BW United Kingdom:011 44 1284 718681, 011 44 1284 724384, EMAIL: sales@imeche.org.uk, INTERNET: http://www.pepublishing.com, Fax: 011 44 1284 704006) pp. 11254-11263 - issn: 0954-4062 - wos: WOS:001317883100001 (0) - scopus: 2-s2.0-85204578828 (0)
2108/393031 - 2024 -
Manufacturing of a shape memory polymer composite actuator with embedded heater Iorio, Leandro; Proietti, Alice; Bellisario, Denise; Quadrini, Fabrizio; Santo, Loredana - 03 - Contributo in libro
libro: Materials forming: the 27th international ESAFORM conference on materials forming (ESAFORM 2024) - (9781644903131)
2108/393029 - 2024 -
Compression molding of low-density polyethylene matrix/glass-fiber-reinforced thick laminates Quadrini, Fabrizio; Patrizii, Giorgio; Proietti, Alice; Iorio, Leandro; Bellisario, Denise; Santo, Loredana - 01 - Articolo su rivista
rivista: POLYMERS (Basel : Molecular Diversity Preservation International) pp. - - issn: 2073-4360 - wos: WOS:001332629800001 (0) - scopus: 2-s2.0-85206498187 (0)
2108/393032 - 2024 -
Recycling of thermoset fiberglass by direct molding of ground powders Bellisario, Denise; Iorio, Leandro; Proietti, Alice; Quadrini, Fabrizio; Santo, Loredana - 03 - Contributo in libro
libro: Materials forming: the 27th international ESAFORM conference on materials forming (ESAFORM 2024) - (9781644903131)
2108/393024 - 2023 -
Out-of-autoclave molding of carbon fiber laminates by consolidation with shape memory polymer foams Iorio, Leandro; Quadrini, Fabrizio; Gallo, Nicola; Santo, Loredana - 01 - Articolo su rivista
rivista: JOURNAL OF COMPOSITE MATERIALS (Technomic Publishing Company Incorporated:2455 Teller Road:Thousand Oaks, CA 91320:(800)233-9936, (717)291-5609, EMAIL: customer@techpub.com, INTERNET: http://www.techpub.com) pp. 4147-4156 - issn: 0021-9983 - wos: WOS:001067568200001 (0) - scopus: 2-s2.0-85171540664 (0)
2108/339108 - 2023 -
Out-of-autoclave molding of carbon fiber composites pipes with interlaminar carbon nanotubes Bellisario, Denise; Iorio, Leandro; Proietti, Alice; Quadrini, Fabrizio; Santo, Loredana - 02 - Intervento a convegno
congresso: 26th International ESAFORM Conference on Material Forming, ESAFORM 2023 (pol)
libro: Materials Research Proceedings - (9781644902479)
2108/339109 - 2023 -
Materials for Space Astronaut Service Robots Iorio, Leandro; Proietti, Alice; Quadrini, Fabrizio; Santo, Loredana - 03 - Contributo in libro
libro: Mechanisms and Machine Science - (978-3-031-28446-5)
2108/339110 - 2023 -
Cytotoxicity and Antibiofilm Activity of Silver-Polypropylene Nanocomposites Bellisario, Denise; Santo, Loredana; Quadrini, Fabrizio - 01 - Articolo su rivista
rivista: ANTIBIOTICS (Basel : MDPI) pp. - - issn: 2079-6382 - wos: WOS:000994639200001 (5) - scopus: 2-s2.0-85160362249 (7)
2108/339111 - 2023 -
Thermo-formable hybrid carbon fibre laminates by composite recycling Proietti, Alice; Quadrini, Fabrizio; Santo, Loredana - 01 - Articolo su rivista
rivista: INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY (United Kingdom: Springer-Verlag London Limited:) pp. 2989-3001 - issn: 0268-3768 - wos: WOS:001006794200003 (2) - scopus: 2-s2.0-85161386114 (2)
2108/373466 - 2023 -
Smart composite booms for solar sails Quadrini, Fabrizio; Iorio, Leandro; Santo, Loredana - 01 - Articolo su rivista
rivista: JOURNAL OF COMPOSITES SCIENCE (Switzerland: MDPI) pp. - - issn: 2504-477X - wos: WOS:001131419500001 (0) - scopus: 2-s2.0-85180713002 (0)
2108/309052 - 2022 -
Advanced Materials for Space Applications Quadrini, Fabrizio; Santo, Loredana - 02 - Intervento a convegno
congresso: International Conference on the Characterization and Control of Interfaces ICCCI ()
2108/309017 - 2022 -
Durability of Shape Memory Polymer Composite Laminates under Thermo-Mechanical Cycling Quadrini, Fabrizio; Iorio, Leandro; Bellisario, Denise; Santo, Loredana - 01 - Articolo su rivista
rivista: JOURNAL OF COMPOSITES SCIENCE (Switzerland: MDPI) pp. - - issn: 2504-477X - wos: WOS:000775002500001 (4) - scopus: 2-s2.0-85127085495 (4)
2108/309021 - 2022 -
Testing the Dispersion of Nanoparticles in a Nanocomposite with an Ultra-Low Fill Content Using a Novel Non-Destructive Evaluation Technique Bellisario, Denise; Quadrini, Fabrizio; Santo, Loredana - 01 - Articolo su rivista
rivista: MATERIALS (Basel: Molecular Diversity Preservation International-MDPI) pp. - - issn: 1996-1944 - wos: WOS:000755041800001 (7) - scopus: 2-s2.0-85124180159 (8)
2108/309018 - 2022 -
Microscopic testing of carbon fiber laminates with shape memory epoxy interlayer Bellisario, Denise; Quadrini, Fabrizio; Iorio, Leandro; Santo, Loredana - 01 - Articolo su rivista
rivista: MATERIALS TODAY COMMUNICATIONS (Elsevier B.V.) pp. - - issn: 2352-4928 - wos: WOS:000861825600005 (4) - scopus: 2-s2.0-85132877895 (6)
2108/309020 - 2022 -
Damping Behavior of Hybrid Composite Structures by Aeronautical Technologies Bellisario, Denise; Quadrini, Fabrizio; Santo, Loredana - 01 - Articolo su rivista
rivista: APPLIED SCIENCES (Basel: MDPI AG, 2011-) pp. - - issn: 2076-3417 - wos: WOS:000840255200001 (1) - scopus: 2-s2.0-85136920713 (1)
2108/309016 - 2022 -
Hybrid nanocomposites with ultra-low filling content by nano-coating fragmentation Bellisario, Denise; Quadrini, Fabrizio; Santo, Loredana - 01 - Articolo su rivista
rivista: POLYMER-PLASTICS TECHNOLOGY AND MATERIALS (Philadelphia PA: Taylor and Francis Group LLC) pp. 41-55 - issn: 2574-0881 - wos: WOS:000668772100001 (2) - scopus: 2-s2.0-85109284873 (3)
2108/314479 - 2022 -
Modeling Nonlinear Hydroelastic Response for the Endwall of the Plane Channel Due to Its Upper-Wall Vibrations Santo, Loredana - 01 - Articolo su rivista
rivista: MATHEMATICS (Basel: MDPI AG, 2013-) pp. - - issn: 2227-7390 - wos: WOS:000873270200001 (3) - scopus: 2-s2.0-85140593033 (8)
2108/309051 - 2022 -
Autoclave molding of carbon fiber laminates with interlaminar carbon nanotubes Quadrini, Fabrizio; Bellisario, Denise; Iorio, Leandro; Santo, Loredana - 02 - Intervento a convegno
congresso: ASME 2022 17th International Manufacturing Science and Engineering Conference, MSEC 2022 (usa)
libro: Proceedings of ASME 2022 17th International Manufacturing Science and Engineering Conference, MSEC 2022 - (978-0-7918-8581-9)
2108/309050 - 2022 -
Recycling of Powders from Cutting of Medium Density Fiberboard Quadrini, Fabrizio; Bellisario, Denise; Iorio, Leandro; Santo, Loredana - 02 - Intervento a convegno
congresso: 25th International Conference on Material Forming, ESAFORM 2022 ()
libro: Key Engineering Materials - (978-3-0357-1759-4)
2108/314477 - 2022 -
Space sustainability, advanced materials and micro/nanotechnologies for future life in outer Space Santo, Loredana - 01 - Articolo su rivista
rivista: EMERGENT MATERIALS (Cham: Springer International Publishing) pp. 237-240 - issn: 2522-574X - wos: WOS:000764495800002 (4) - scopus: 2-s2.0-85125589245 (6)
2108/309047 - 2021 -
Conical thermoplastic composite anisogrid lattice structure by innovative out-of-autoclave molding process Quadrini, Fabrizio; Iorio, Leandro; Santoro, Daniele; Santo, Loredana - 02 - Intervento a convegno
congresso: ASME 2021 16th International Manufacturing Science and Engineering Conference, MSEC 2021 ()
libro: Proceedings of the ASME 2021 16th International Manufacturing Science and Engineering Conference, MSEC 2021 - (978-0-7918-8507-9)
2108/309046 - 2021 -
Anisogrid lattice cylinders made of thermoplastic composite under buckling loading Iorio, Leandro; Bellisario, Denise; Santoro, Daniele; Quadrini, Fabrizio; Santo, Loredana - 02 - Intervento a convegno
congresso: 24th International ESAFORM Conference on Material Forming, ESAFORM 2021 ()
libro: ESAFORM 2021 - 24th International Conference on Material Forming - ()
2108/309048 - 2021 -
Additive manufacturing of composite parts by nano-coating fragmentation Iorio, Leandro; Santoro, Daniele; Quadrini, Fabrizio; Santo, Loredana; Bellisario, Denise - 02 - Intervento a convegno
congresso: XV Convegno dell’Associazione Italiana delle Tecnologie Manifatturiere AITEM ()
2108/309049 - 2021 -
AUTOCLAVE MOLDING OF CARBON PEKK COMPOSITES Quadrini, Fabrizio; Iorio, Leandro; Santo, Loredana - 02 - Intervento a convegno
congresso: The 9th International Conference on Modern Manufacturing Technologies in Industrial Engineering MODTECH ()
2108/297335 - 2021 -
Shape memory polymer composite unit with embedded heater Quadrini, Fabrizio; Iorio, Leandro; Bellisario, Denise; Santo, Loredana - 01 - Articolo su rivista
rivista: SMART MATERIALS AND STRUCTURES (IOP Publishing Limited:Dirac House, Temple Back, Bristol BS1 6BE United Kingdom:011 44 117 9297481, EMAIL: custserv@iop.org, INTERNET: http://www.iop.org, Fax: 011 44 117 9294318) pp. - - issn: 0964-1726 - wos: WOS:000655269000001 (11) - scopus: 2-s2.0-85107995458 (13)
2108/297329 - 2021 -
Shape Memory Composite Sandwich Structures with Self-Healing Properties Quadrini, Fabrizio; Bellisario, Denise; Iorio, Leandro; Santo, Loredana - 01 - Articolo su rivista
rivista: POLYMERS (Basel : Molecular Diversity Preservation International) pp. - - issn: 2073-4360 - wos: WOS:000701146400001 (13) - scopus: 2-s2.0-85114684355 (12)
2108/251290 - 2020 -
Biomechanical properties and histomorphometric features of aortic tissue in patients with or without bicuspid aortic valve Pisano, Calogera; Nardi, Paolo; Bertoldo, Fabio; Santo, Loredana; Bellisario, Denise; Verzicco, Roberto; Ruvolo, Giovanni; Orlandi, Augusto - 01 - Articolo su rivista
rivista: JOURNAL OF THORACIC DISEASE (Hong Kong : Pioneer Bioscience Publishing Company) pp. 2304-2316 - issn: 2072-1439 - wos: WOS:000537461900059 (7) - scopus: 2-s2.0-85086040120 (9)
2108/275365 - 2020 -
Composite laminates with recycled carbon fibres and carbon nanotubes Santo, Loredana; Bellisario, Denise; Quadrini, Fabrizio - 01 - Articolo su rivista
rivista: MATERIALE PLASTICE () pp. 86-91 - issn: 0025-5289 - wos: WOS:000528195000011 (2) - scopus: 2-s2.0-85084975756 (2)
2108/309044 - 2020 -
Cold compression molding of pyrolytic carbon from tires for oil absorbers Iorio, Leandro; Bellisario, Denise; Santo, Loredana; Quadrini, Fabrizio - 02 - Intervento a convegno
rivista: PROCEDIA MANUFACTURING (Elsevier B.V.) pp. 799-803 - issn: 2351-9789 - wos: WOS:000863670600128 (0) - scopus: 2-s2.0-85085511518 (0)
congresso: 23rd International Conference on Material Forming, ESAFORM 2020 (deu)
libro: Procedia Manufacturing - ()
2108/263080 - 2020 -
Applications of shape-memory polymers, and their blends and composites Santo, Loredana; Quadrini, Fabrizio; Bellisario, Denise - 03 - Contributo in libro
libro: Shape Memory Polymers, Blends and Composites: Advances and Applications - (978-981-13-8573-5)
2108/275369 - 2020 -
Anisogrid thermoplastic composite lattice structure by innovative out-of-autoclave process Santoro, Daniele; Bellisario, Denise; Quadrini, Fabrizio; Santo, Loredana - 01 - Articolo su rivista
rivista: INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY (United Kingdom: Springer-Verlag London Limited:) pp. 1941-1952 - issn: 0268-3768 - wos: WOS:000551747100006 (8) - scopus: 2-s2.0-85088500650 (15)
2108/275367 - 2020 -
Mold replication in injection molding of high density polyethylene Quadrini, Fabrizio; Bellisario, Denise; Santo, Loredana - 01 - Articolo su rivista
rivista: POLYMER ENGINEERING AND SCIENCE (Society of Plastics Engineers:14 Fairfield Drive, PO Box 0403:Brookfield, CT 06804:(203)775-0471, INTERNET: http://www.4spe.org, Fax: (203)775-8490) pp. 2459-2469 - issn: 0032-3888 - wos: WOS:000554866800001 (4) - scopus: 2-s2.0-85088843706 (5)
2108/232256 - 2019 -
Shape memory composite structures for self-deployable solar sails Santo, Loredana; Bellisario, Denise; Quadrini, Fabrizio - 03 - Contributo in libro
libro: Astrodynamics - ()
2108/232234 - 2019 -
Shape Memory Polymer Composites For Long-Term Exposure To Space Environment Quadrini, Fabrizio; Bellisario, Denise; Santo, Loredana - 03 - Contributo in libro
libro: Advanced Materials Letters - ()
2108/232226 - 2019 -
Increasing flexural strength of carbon fiber laminates by incorporation of interlaminar CNTs Quadrini, Fabrizio; Bellisario, Denise; Santo, Loredana - 02 - Intervento a convegno
congresso: XIV Convegno A.I.Te.M. ()
2108/232224 - 2019 -
Shape Memory Polymer Composites and Cosmic Ray Shielding Materials in Open Space Santo, Loredana; Quadrini, Fabrizio; Bellisario, Denise - 02 - Intervento a convegno
congresso: Applied Space Environments Conference (ASEC) 2019 ()
2108/232220 - 2019 -
Shape memory polymer composite actuator: Modeling approach for preliminary design and validation Quadrini, Fabrizio; Santo, Loredana - 03 - Contributo in libro
libro: Actuators - ()
2108/232216 - 2019 -
Shape memory polymer composites by molding aeronautical prepregs with shape memory polymer interlayers Quadrini, Fabrizio; Bellisario, Denise; Santo, Loredana - 01 - Articolo su rivista
rivista: MATERIALS RESEARCH EXPRESS (Bristol : IOP Publishing Ltd) pp. 115711- - issn: 2053-1591 - wos: WOS:000495690600002 (10) - scopus: 2-s2.0-85075255944 (10)
2108/232212 - 2019 -
RECYCLING OF PRINTED CIRCUIT BOARDS BY DIRECT MOLDING TECHNOLOGY Quadrini, Fabrizio; Bellisario, Denise; Santo, Loredana - 02 - Intervento a convegno
congresso: ASME 2019 14th International Manufacturing Science and Engineering Conference, MSEC 2019 ()
2108/232208 - 2019 -
OUT-OF-AUTOCLAVE REPAIR OF COMPOSITE LAMINATES BY USING SHAPE MEMORY POLYMER FOAMS Bellisario, Denise; Quadrini, Fabrizio; Santo, Loredana - 02 - Intervento a convegno
congresso: ASME 2019 14th International Manufacturing Science and Engineering Conference, MSEC 2019 ()
2108/232204 - 2019 -
A sustainable molding process for new rubber products from tire recycling Quadrini, Fabrizio; Santo, Loredana - 03 - Contributo in libro
libro: Progress in Rubber, Plastics and Recycling Technology - ()
2108/309042 - 2019 -
Shape memory polymer composite laminates and sandwiches in Space environment Santo, Loredana; Iorio, Leandro; Bellisario, Denise; Quadrini, Fabrizio - 02 - Intervento a convegno
congresso: EUOMAT ()
2108/309043 - 2019 -
High damping composite materials for avionics Iorio, Leandro; Bellisario, Denise; Quadrini, Fabrizio; Santo, Loredana - 02 - Intervento a convegno
congresso: EUROMAT 2019 ()
2108/309041 - 2019 -
Self-deployable solar sails with shape memory polymer composite structure Iorio, Leandro; Bellisario, Denise; Quadrini, Fabrizio; Santo, Loredana - 02 - Intervento a convegno
congresso: EUROMAT ()
2108/309037 - 2018 -
Production of nanoparticles by nano-coating fragmentation Quadrini, Fabrizio; Bellisario, Denise; Santo, Loredana - 02 - Intervento a convegno
congresso: International Conference on the Characterization and Control of Interfaces - ICCCI 2018 ()
2108/373486 - 2018 -
Online glucose measurement in DMEN for in vitro cell culture Liebscher, Thilo; Santo, Loredana - 03 - Contributo in libro
libro: THERMEC 2018: 10th International Conference on Processing and Manufacturing of Advanced Materials - ()
2108/309038 - 2018 -
APPLICATION OF SHAPE MEMORY COMPOSITES ON SMALL SATELLITES Santo, Loredana; Quadrini, Fabrizio; Bellisario, Denise; Iorio, Leandro - 02 - Intervento a convegno
congresso: IV International Conference - SCIENTIFIC AND TECHNOLOGICAL EXPERIMENTS ON AUTOMATIC SPACE VEHICLES AND SMALL SATELLITES SPEXP-2018 ()
2108/232214 - 2018 -
Design and testing of self-deployable structures for advanced space applications Accettura, Antonio Gabriele; Santo, Loredana; Quadrini, Fabrizio - 02 - Intervento a convegno
congresso: International Astronautical Congress, IAC 2018 (Bremen, Germany)
libro: Proceedings of the International Astronautical Congress, IAC 2018 - (9781510881655)
2108/212257 - 2018 -
Local density measurement of additive manufactured copper parts by instrumented indentation Santo, Loredana; Quadrini, Fabrizio; Bellisario, Denise; Tedde, Giovanni Matteo - 02 - Intervento a convegno
congresso: 21st International ESAFORM Conference on Material Forming, ESAFORM 2018 (ita)
libro: AIP Conference Proceedings - (9780735416635)
2108/230940 - 2018 -
An innovative industrial process for forging 7050 Al alloy Tedde, Giovanni Matteo; Montanari, Roberto; Richetta, Maria; Santo, Loredana; Varone, Alessandra - 02 - Intervento a convegno
congresso: thermec ()
libro: Materials Science Forum - ()
2108/212261 - 2018 -
Variability of mechanical properties of collagen membranes used in dentistry Santo, Loredana; Quadrini, Fabrizio; Bellisario, Denise - 01 - Articolo su rivista
rivista: MATERIALE PLASTICE () pp. 488-493 - issn: 0025-5289 - wos: WOS:000454987400006 (2) - scopus: 2-s2.0-85060569874 (2)
2108/212253 - 2018 -
Design of nano-filled pet sheets with enhanced barrier properties Quadrini, Fabrizio; Bellisario, Denise; Santo, Loredana - 02 - Intervento a convegno
congresso: ASME 2018 13th International Manufacturing Science and Engineering Conference, MSEC 2018 (USA)
libro: ASME 2018 13th International Manufacturing Science and Engineering Conference, MSEC 2018 - (9780791851364)
2108/212251 - 2018 -
Shape memory behavior of carbon composites with functional interlayer Santo, Loredana; Di Iorio, Luigi; Tedde, Giovanni Matteo; Quadrini, Fabrizio - 02 - Intervento a convegno
congresso: ASME 2018 13th International Manufacturing Science and Engineering Conference, MSEC 2018 (usa)
libro: ASME 2018 13th International Manufacturing Science and Engineering Conference, MSEC 2018 - (9780791851364)
2108/212259 - 2018 -
Effects of micro-textured polystyrene substrates by compression molding on cell adhesion and proliferation Bellisario, Denise; Quadrini, Fabrizio; Ibargoyen Santolim, Gustavo; Tedde, Giovanni Matteo; Caputo, Valerio; Spitalieri, Paola; Sangiuolo, Federica Carla; Santo, Loredana - 01 - Articolo su rivista
rivista: MATERIALE PLASTICE () pp. 502-506 - issn: 0025-5289 - wos: WOS:000454987400009 (1) - scopus: 2-s2.0-85060596600 (1)
2108/212249 - 2018 -
Structural design of hybrid processing unit chassis for airborne electronic systems Santoro, Daniele; Quadrini, Fabrizio; Santo, Loredana - 02 - Intervento a convegno
congresso: ASME 2018 13th International Manufacturing Science and Engineering Conference, MSEC 2018 (USA)
libro: ASME 2018 13th International Manufacturing Science and Engineering Conference, MSEC 2018 - (9780791851364)
2108/212247 - 2018 -
Manufacturing of antibacterial additives by nano-coating fragmentation Bellisario, Denise; Quadrini, Fabrizio; Santo, Loredana; Tedde, Giovanni Matteo - 02 - Intervento a convegno
congresso: ASME 2018 13th International Manufacturing Science and Engineering Conference, MSEC 2018 (USA)
libro: ASME 2018 13th International Manufacturing Science and Engineering Conference, MSEC 2018 - (9780791851364)
2108/212263 - 2018 -
Frozen stresses in shape memory polymer composites Tedde, Giovanni Matteo; Santo, Loredana; Bellisario, Denise; Quadrini, Fabrizio - 01 - Articolo su rivista
rivista: MATERIALE PLASTICE () pp. 494-497 - issn: 0025-5289 - wos: WOS:000454987400007 (6) - scopus: 2-s2.0-85060643167 (7)
2108/193721 - 2018 -
Thermosetting polyester foams by infiltration in soluble preforms Quadrini, Fabrizio; Lucignano, Carmine; Santo, Loredana - 01 - Articolo su rivista
rivista: JOURNAL OF CELLULAR PLASTICS (Technomic Publishing Company Incorporated:2455 Teller Road:Thousand Oaks, CA 91320:(800)233-9936, (717)291-5609, EMAIL: customer@techpub.com, INTERNET: http://www.techpub.com) pp. 707-718 - issn: 0021-955X - wos: WOS:000438581300001 (1) - scopus: 2-s2.0-85041904524 (1)
2108/193716 - 2018 -
Solid-state foaming of epoxy resin under hypergravity and simulated microgravity Quadrini, Fabrizio; Tedde, Giovanni Matteo; Santo, Loredana - 01 - Articolo su rivista
rivista: ADVANCES IN POLYMER TECHNOLOGY (John Wiley & Sons Incorporated:Customer Service, 111 River Street:Hoboken, NJ 07030:(800)225-5945, (201)748-6000, EMAIL: societyinfo@wiley.com, INTERNET: http://www.wiley.com, Fax: (212)748-6551) pp. 2616-2624 - issn: 0730-6679 - wos: WOS:000450015800025 (3) - scopus: 2-s2.0-85040793812 (5)
2108/193120 - 2018 -
Shape memory behavior of PET foams Santo, Loredana; Bellisario, Denise; Quadrini, Fabrizio - 01 - Articolo su rivista
rivista: POLYMERS (Basel : Molecular Diversity Preservation International) pp. 115- - issn: 2073-4360 - wos: WOS:000427542900010 (18) - scopus: 2-s2.0-85040968822 (17)
2108/193118 - 2017 -
Conceptual design of an experiment for the international space station about cosmic ray shielding materials Quadrini, Fabrizio; Santo, Loredana - 02 - Intervento a convegno
congresso: ASME 2017 12th International Manufacturing Science and Engineering Conference, MSEC 2017 collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing (usa)
libro: ASME 2017 12th International Manufacturing Science and Engineering Conference, MSEC 2017 collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing - (9780791850732)
2108/193116 - 2017 -
Conceptual design of an experiment for the international space station about shape memory composite in space environment Santo, Loredana; Bellisario, Denise; Tedde, Giovanni Matteo; Quadrini, Fabrizio - 02 - Intervento a convegno
congresso: ASME 2017 12th International Manufacturing Science and Engineering Conference, MSEC 2017 collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing (usa)
libro: ASME 2017 12th International Manufacturing Science and Engineering Conference, MSEC 2017 collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing - (9780791850732)
2108/193114 - 2017 -
Compression moulding of thermoplastic nanocomposites filled with MWCNT Quadrini, Fabrizio; Bellisario, Denise; Santo, Loredana - 01 - Articolo su rivista
rivista: POLYMERS & POLYMER COMPOSITES (RAPRA Technology Limited:Shawbury Shrewsbury, Shropshire SY4 4NR United Kingdom:011 44 1939 250383, EMAIL: mfarnsworth@rapra.net, INTERNET: http://www.rapra.net, Fax: 011 44 1939 251118) pp. 611-620 - issn: 0967-3911 - wos: WOS:000407409800006 (6) - scopus: 2-s2.0-85027516076 (7)
2108/193122 - 2017 -
Rubber products from tire recycling in a circular economy approach Quadrini, Fabrizio; Bellisario, Denise; Gagliardi, Donatella; Tedde, Giovanni Matteo; Santo, Loredana - 02 - Intervento a convegno
congresso: XIII Convegno A.I.Te.M. ()
2108/193110 - 2017 -
Surface Tailoring of Aluminum Sheets by PVD Sputtering Quadrini, Fabrizio; Bellisario, Denise; Tedde, Giovanni Matteo; Ibargoyen Santolim, Gustavo; Santo, Loredana - 02 - Intervento a convegno
rivista: PROCEDIA ENGINEERING (Amsterdam : Elsevier) pp. 375-380 - issn: 1877-7058 - wos: WOS:000404868500059 (0) - scopus: 2-s2.0-85020888165 (0)
congresso: 17th International Conference on Sheet Metal, SHEMET 2017 (University of Palermo, Viale delle Scienze Building n.7, ita)
libro: Procedia Engineering - ()
2108/181374 - 2017 -
Anti-bacterial nanocomposites by silver nano-coating fragmentation Quadrini, Fabrizio; Bellisario, Denise; Santo, Loredana; Tedde, Giovanni Matteo - 02 - Intervento a convegno
congresso: 9th International Conference on Processing and Manufacturing of Advanced Materials, THERMEC 2016 (aut)
libro: Materials Science Forum - (9783035711295)
2108/181261 - 2017 -
Miniaturized flow-through bioreactor for processing and testing in pharmacology Santo, Loredana; Quadrini, Fabrizio - 02 - Intervento a convegno
congresso: 9th International Conference on Processing and Manufacturing of Advanced Materials, THERMEC 2016 ()
2108/181370 - 2017 -
Shape recovery of polymeric matrix composites by irradiation Santo, Loredana; Bellisario, Denise; Quadrini, Fabrizio - 02 - Intervento a convegno
congresso: THERMEC 2016 ()
Santo, Loredana - 01 - Articolo su rivista
rivista: PROGRESS IN AEROSPACE SCIENCES (-Oxford :PERGAMON-ELSEVIER SCIENCE LTD.
-Oxford : Pergamon Press. 1970-) pp. 60-65 - issn: 0376-0421 - wos: WOS:000374071300006 (48) - scopus: 2-s2.0-84978058379 (56)
2108/173242 - 2016 -
Shape recovery of PET foams after cold compression Santo, Loredana; Bellisario, Denise; Quadrini, Fabrizio - 02 - Intervento a convegno
congresso: 19th International ESAFORM Conference on Material Forming, ESAFORM 2016 (fra)
2108/173234 - 2016 -
Molding articles made of 100% recycled fiberglass Quadrini, Fabrizio; Bellisario, Denise; Santo, Loredana - 01 - Articolo su rivista
rivista: JOURNAL OF COMPOSITE MATERIALS (Technomic Publishing Company Incorporated:2455 Teller Road:Thousand Oaks, CA 91320:(800)233-9936, (717)291-5609, EMAIL: customer@techpub.com, INTERNET: http://www.techpub.com) pp. 2959-2969 - issn: 0021-9983 - wos: WOS:000382453100006 (6) - scopus: 2-s2.0-84982984304 (7)
2108/173244 - 2016 -
Shape memory composite antennas for space applications Santo, Loredana; Quadrini, Fabrizio; Bellisario, Denise - 02 - Intervento a convegno
rivista: IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING (IOP electronic journals) pp. 012066- - issn: 1757-8981 - wos: WOS:000391131300065 (15) - scopus: 2-s2.0-85013018526 (18)
congresso: IManE 2016 - 20TH INNOVATIVE MANUFACTURING ENGINEERING AND ENERGY CONFERENCE ()
2108/173229 - 2016 -
Shape memory polymeric composites sensing by optic fibre Bragg gratings: A very first approach Quadrini, Fabrizio; Santo, Loredana - 02 - Intervento a convegno
congresso: 8th International Conference on Times of Polymers and Composites: From Aerospace to Nanotechnology (ita)
libro: AIP Conf. Proc. - (9780735413900)
2108/173238 - 2016 -
Direct molding of pavement tiles made of ground tire rubber Quadrini, Fabrizio; Gagliardi, Donatella; Tedde, Giovanni Matteo; Santo, Loredana - 02 - Intervento a convegno
congresso: 19th International ESAFORM Conference on Material Forming, ESAFORM 2016 (fra)
2108/173227 - 2016 -
Conceptual prototypes of composite structures for aerospace Santo, Loredana; Quadrini, Fabrizio; Bellisario, Denise; Accettura, Antonio Gabriele - 02 - Intervento a convegno
congresso: ASME 2016 11th International Manufacturing Science and Engineering Conference, MSEC 2016 (usa)
2108/181314 - 2016 -
Auxetic epoxy foams produced by solid state foaming Quadrini, Fabrizio; Bellisario, Denise; Costanza, Girolamo; Santo, Loredana - 01 - Articolo su rivista
rivista: JOURNAL OF CELLULAR PLASTICS (Technomic Publishing Company Incorporated:2455 Teller Road:Thousand Oaks, CA 91320:(800)233-9936, (717)291-5609, EMAIL: customer@techpub.com, INTERNET: http://www.techpub.com) pp. 441-454 - issn: 0021-955X - wos: WOS:000379787300004 (12) - scopus: 2-s2.0-84976348448 (16)
2108/193108 - 2016 -
Shape Memory Composites for Self-Deployable Structures in Space Environment Santo, Loredana; Quadrini, Fabrizio; Reali, Marco - 02 - Intervento a convegno
congresso: NATO Specialists Meeting on "Best Practices for Risk Reduction for Overall Space Systems" STO-MP-AVT-257 ()
libro: Meeting Proceedings RDP - (978-92-837-2059-1)
2108/193102 - 2016 -
Substituting die-cast products by injection molded high performance polymers Gagliardi, Donatella; Quadrini, Fabrizio; Santo, Loredana - 02 - Intervento a convegno
congresso: 3rd International Conference on Polymer Processing in Engineering, PPE 2015 ()
libro: Key Engineering Materials - (9783038355571)
2108/193098 - 2016 -
Microsculpturing of polymeric surfaces by compression molding Tedde, Giovanni Matteo; Bellisario, Denise; Santo, Loredana; Quadrini, Fabrizio - 02 - Intervento a convegno
congresso: 3rd International Conference on Polymer Processing in Engineering, PPE 2015 ()
libro: Key Engineering Materials - (9783038355571)
2108/173222 - 2016 -
Production of rubber goods made of 100% ground tire rubber Quadrini, Fabrizio; Santo, Loredana - 02 - Intervento a convegno
congresso: ASME 2016 11th International Manufacturing Science and Engineering Conference, MSEC 2016 (usa)
2108/193100 - 2016 -
Multilayered composite plates with shape memory properties Santo, Loredana; Quadrini, Fabrizio; Bellisario, Denise - 02 - Intervento a convegno
congresso: 3rd International Conference on Polymer Processing in Engineering, PPE 2015 ()
libro: Key Engineering Materials - (9783038355571)
2108/181294 - 2015 -
Mechanical qualification of collagen membranes used in dentistry Quadrini, Fabrizio; Bellisario, Denise; Santo, Loredana - 01 - Articolo su rivista
rivista: ANNALI DELL'ISTITUTO SUPERIORE DI SANITÀ (Latest publisher: Roma: Istituto Superiore di Sanità
Roma: Istituto poligrafico dello stato) pp. 229-235 - issn: 0021-2571 - wos: WOS:000368342100011 (59) - scopus: 2-s2.0-84941964212 (63)
2108/193493 - 2015 -
PROCESSO DI PRODUZIONE DI PLASTICHE NANOCOMPOSITE A PARTIRE DA GRANULI RIVESTITI CON FILM NANOMETRICI Quadrini, Fabrizio; Bellisario, Denise; Gagliardi, Donatella; Santo, Loredana; Tedde, Giovanni Matteo - 06 - Brevetti e altre privative registrate
2108/105430 - 2015 -
Mission BION-M1: Results of RIBES/FOAM2 experiment on shape memory polymer foams and composites Santo, Loredana; Quadrini, Fabrizio - 01 - Articolo su rivista
rivista: AEROSPACE SCIENCE AND TECHNOLOGY (attuale: ELSEVIER FRANCE-EDITIONS SCIENTIFIQUES MEDICALES ELSEVIER, 23 RUE LINOIS, PARIS, FRANCE, 75724
-Dunod Gauthier Villars:15 rue Gossin, 92543 Montrouge France:011 33 1 40926527, 011 33 1 46565266, Fax: 011 33 1 40926597) pp. 109-114 - issn: 1270-9638 - wos: WOS:000348086800011 (32) - scopus: 2-s2.0-84913540453 (37)
2108/193096 - 2015 -
Manufacturing of shape memory composite structures for aerospace applications in a lab-scale Quadrini, Fabrizio; Santo, Loredana; Bellisario, Denise - 02 - Intervento a convegno
congresso: XII Convegno A.I.Te.M. ()
2108/193094 - 2015 -
Self-Repairing Behavior of Shape Memory Composites Santo, Loredana; Quadrini, Fabrizio; Bellisario, Denise - 02 - Intervento a convegno
congresso: IManE 2015 ()
2108/193092 - 2015 -
Shape memory composite sandwich with self-healing properties for marine applications Santo, Loredana; Quadrini, Fabrizio - 02 - Intervento a convegno
congresso: 20th International Conference on Composite Materials (Copenhagen, Danimarca)
libro: ICCM International Conferences on Composite Materials - ()
2108/193143 - 2015 -
Laser forming of aluminium metal panel foams Quadrini, Fabrizio; Santo, Loredana - 01 - Articolo su rivista
rivista: ANALELE UNIVERSITATII "DUNAREA DE JOS" GALATI. FASCICULA V, TEHNOLOGII ÎN CONSTRUCTIA DE MASINI (Galaţi : Universitatea "Dunărea de Jos"
Galaţi : Universitatea "Dunărea de Jos") pp. 37-40 - issn: 1221-4566 - wos: (0) - scopus: (0)
2108/193495 - 2015 -
METODO DI FABBRICAZIONE DI ADDITIVI PER PLASTICHE NANOCOMPOSITE CON PROPRIETA' ANTIMICROBICHE E ANTIBATTERICHE Quadrini, Fabrizio; Santo, Loredana; Gagliardi, Donatella; Bellisario, Denise; Tedde, Giovanni Matteo - 06 - Brevetti e altre privative registrate
2108/181310 - 2015 -
Manufacturing of a shape memory polymer actuator Santo, Loredana; Quadrini, Fabrizio - 02 - Intervento a convegno
congresso: ASME 2015 International Manufacturing Science and Engineering Conference, MSEC 2015 (usa)
2108/373487 - 2015 -
Mechanical behaviour evaluation of arboform material samples by bending deflection test Santo, Loredana - 01 - Articolo su rivista
rivista: MATERIALE PLASTICE () pp. 423-426 - issn: 0025-5289 - wos: (0) - scopus: 2-s2.0-84951286044 (12)
2108/159395 - 2015 -
CNT and graphene filled shape memory foams by solid state foaming Santo, Loredana; Quadrini, Fabrizio - 02 - Intervento a convegno
congresso: 18th International ESAFORM Conference on Material Forming, ESAFORM 2015 (aut)
2108/181312 - 2015 -
Shape memory composite hands for space applications Quadrini, Fabrizio; Santo, Loredana - 02 - Intervento a convegno
congresso: ASME 2015 International Manufacturing Science and Engineering Conference, MSEC 2015 (usa)
2108/181298 - 2015 -
Shape Memory Epoxy Foams and Composites: Ribes-foam2 Experiment on Spacecraft "bion-m1" and Future Perspective Santo, Loredana; Quadrini, Fabrizio - 02 - Intervento a convegno
rivista: PROCEDIA ENGINEERING (Amsterdam : Elsevier) pp. 50-56 - issn: 1877-7058 - wos: WOS:000381101900008 (10) - scopus: 2-s2.0-84946085132 (12)
congresso: 3rd IAA-RACTs Conference on Scientific and Technological Experiments on Automatic Space Vehicles and Small Satellites, SPEXP 2014; Samara; Russian Federation; 9 September 2014 through 11 September 2014; Code 116046 ()
2108/101703 - 2014 -
Progettazione e realizzazione di un attuatore ibrido SMA-SMP Costanza, Girolamo; Quadrini, Fabrizio; Santo, Loredana; Tata, Maria Elisa - 02 - Intervento a convegno
congresso: 35° Convegno AIM (roma)
libro: 35° Convegno AIM - (978-88-98990-01-6)
2108/101669 - 2014 -
Recent Developments in the Field of Shape Memory Epoxy Foams Santo, Loredana - 01 - Articolo su rivista
rivista: ADVANCED MATERIALS RESEARCH (Uetikon-Zürich: Trans Tech Publications) pp. 2523-2530 - issn: 1022-6680 - wos: (0) - scopus: 2-s2.0-84902289901 (0)
2108/101580 - 2014 -
Laser Applications in the Field of Plastics Santo, Loredana; Trovalusci, Federica - 03 - Contributo in libro
libro: Comprehensive Materials Processing - (9780080965338)
2108/373488 - 2014 -
Surface engineering techniques and applications: research advancements Santo, Loredana - 05 - Curatele
2108/159413 - 2014 -
Shape memory composites for self-deployable structures in aerospace applications Santo, Loredana; Quadrini, Fabrizio - 02 - Intervento a convegno
rivista: PROCEDIA ENGINEERING (Amsterdam : Elsevier) pp. 42-47 - issn: 1877-7058 - wos: WOS:000369530100006 (82) - scopus: 2-s2.0-84949131156 (104)
congresso: 1st International Symposium on Dynamic Response and Failure of Composite Materials, DRaF 2014; Ischia, Naples; Italy; 14 September 2014 through 17 September 2014; Code 110926 ()
2108/101670 - 2014 -
Direct Molding of Polymers for Biomedical Applications Santo, Loredana; Bellisario, Denise; Quadrini, Fabrizio - 02 - Intervento a convegno
congresso: 17th Conference of the European-Scientific-Association-on-Material-Forming (ESAFORM) ()
2108/101671 - 2014 -
Indentation Recovery of Shape Memory Foams Produced by Solid State Foaming Bellisario, Denise; Quadrini, Fabrizio; Santo, Loredana - 02 - Intervento a convegno
congresso: 17th Conference of the European-Scientific-Association-on-Material-Forming (ESAFORM) ()
2108/105428 - 2014 -
Epoxy-matrix MMT-filled nanocomposite coatings onto aluminum substrates Quadrini, Fabrizio; Bellisario, Denise; Santo, Loredana - 01 - Articolo su rivista
rivista: INTERNATIONAL JOURNAL OF SURFACE ENGINEERING AND INTERDISCIPLINARY MATERIALS SCIENCE (Hershey, PA : IGI Global, [2013]-) pp. 1-15 - issn: 2166-7225 - wos: (0) - scopus: (0)
2108/99089 - 2014 -
Numerical Simulation of Laser Forming of Aluminum Sponges: Effect of Temperature and Heat Treatments Quadrini, Fabrizio; Bellisario, Denise; Santo, Loredana - 02 - Intervento a convegno
congresso: 17th Conference of the European-Scientific-Association-on-Material-Forming (ESAFORM) ()
2108/76865 - 2013 -
Forming of shape memory composite structures Santo, Loredana; Quadrini, Fabrizio - 02 - Intervento a convegno
congresso: 16th ESAFORM Conference on Material Forming (ESAFORM 2013) ()
2108/76867 - 2013 -
Shape memory foams of microbial polyester for biomedical applications Quadrini, Fabrizio; Bellisario, Denise; Santo, Loredana; Bianco, Alessandra - 01 - Articolo su rivista
rivista: POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (Marcel Dekker Incorporated:270 Madison Avenue:New York, NY 10016:(800)228-1160, (212)696-9000, EMAIL: bookorders@dekker.com, INTERNET: http://www.dekker.com, Fax: (212)685-4540) pp. 599-602 - issn: 0360-2559 - wos: WOS:000318286400011 (18) - scopus: 2-s2.0-84877306239 (20)
2108/96647 - 2013 -
The Role of Mixing Time in the Production of Nanocomposite Thermosetting Coatings Quadrini, Fabrizio; Bellisario, Denise; Santo, Loredana - 01 - Articolo su rivista
rivista: POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (Marcel Dekker Incorporated:270 Madison Avenue:New York, NY 10016:(800)228-1160, (212)696-9000, EMAIL: bookorders@dekker.com, INTERNET: http://www.dekker.com, Fax: (212)685-4540) pp. 1200-1212 - issn: 0360-2559 - wos: WOS:000323999700005 (1) - scopus: 2-s2.0-84884268482 (1)
2108/96654 - 2013 -
Nano-clay filled polyester coatings Bellisario, Denise; Quadrini, Fabrizio; Santo, Loredana - 01 - Articolo su rivista
rivista: PROGRESS IN ORGANIC COATINGS (Lausanne : Elsevier Sequoia) pp. 1863-1868 - issn: 0300-9440 - wos: WOS:000326419000028 (9) - scopus: 2-s2.0-84889095629 (10)
2108/76863 - 2013 -
Numerical simulation of laser bending of aluminum foams Quadrini, Fabrizio; Bellisario, Denise; Santo, Loredana - 02 - Intervento a convegno
congresso: 16th ESAFORM Conference on Material Forming (ESAFORM 2013) ()
2108/97491 - 2013 -
Ribes precursor payload on BION-MI Santo, Loredana; Quadrini, Fabrizio - 02 - Intervento a convegno
congresso: International Astronautical Congress, IAC (Beijing; China)
libro: 64th International Astronautical Congress 2013 - (978-162993909-4)
2108/78127 - 2013 -
Direct moulding of rubber granules and powders from tyre recycling Quadrini, Fabrizio; Bellisario, Denise; Santo, Loredana - 02 - Intervento a convegno
congresso: 17th International Conference on Innovative Manufacturing Engineering ()
libro: Applied Mechanics and Materials: IManE 2013 - ()
2108/76868 - 2013 -
Recycling of thermoset polyurethane foams Quadrini, Fabrizio; Bellisario, Denise; Santo, Loredana - 01 - Articolo su rivista
rivista: POLYMER ENGINEERING AND SCIENCE (Society of Plastics Engineers:14 Fairfield Drive, PO Box 0403:Brookfield, CT 06804:(203)775-0471, INTERNET: http://www.4spe.org, Fax: (203)775-8490) pp. 1357-1363 - issn: 0032-3888 - wos: WOS:000330189800001 (33) - scopus: 2-s2.0-84879207522 (36)
2108/105413 - 2013 -
Mold production by selective laser sintering of resin coated sands Quadrini, Fabrizio; Santo, Loredana - 01 - Articolo su rivista
rivista: INTERNATIONAL JOURNAL OF SURFACE ENGINEERING AND INTERDISCIPLINARY MATERIALS SCIENCE (Hershey, PA : IGI Global, [2013]-) pp. 1-13 - issn: 2166-7225 - wos: (0) - scopus: (0)
2108/78131 - 2013 -
Mission STS-134: results of shape memory foam experiment Santo, Loredana; Quadrini, Fabrizio - 01 - Articolo su rivista
rivista: ACTA ASTRONAUTICA (Elmsford N.Y.: Pergamon Press) pp. 333-340 - issn: 0094-5765 - wos: WOS:000323585800035 (15) - scopus: 2-s2.0-84884975147 (23)
2108/181354 - 2012 -
Residual properties of rubber-toughened thermoplastic composite after bending Santo, Loredana; Bellisario, Denise; Quadrini, Fabrizio - 02 - Intervento a convegno
congresso: First International Conference on Mechanics of Nano, Micro and Macro Composite Structures ()
2108/54126 - 2012 -
Shape memory epoxy foams for space applications Quadrini, Fabrizio; Santo, Loredana - 01 - Articolo su rivista
rivista: MATERIALS LETTERS (Amsterdam Netherlands: Elsevier BV) pp. 20-23 - issn: 0167-577X - wos: WOS:000300190300007 (87) - scopus: 2-s2.0-83055181952 (101)
2108/76794 - 2012 -
Solid-state foaming of nano–clay-filled thermoset foams with shape memory properties Quadrini, Fabrizio; Santo, Loredana - 01 - Articolo su rivista
rivista: POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (Marcel Dekker Incorporated:270 Madison Avenue:New York, NY 10016:(800)228-1160, (212)696-9000, EMAIL: bookorders@dekker.com, INTERNET: http://www.dekker.com, Fax: (212)685-4540) pp. 560-567 - issn: 0360-2559 - wos: WOS:000303591800003 (34) - scopus: 2-s2.0-84860895140 (47)
2108/76847 - 2012 -
Behavior of shape memory epoxy foams in microgravity: experimental results of STS-134 mission Santo, Loredana; Quadrini, Fabrizio - 01 - Articolo su rivista
rivista: MICROGRAVITY, SCIENCE AND TECHNOLOGY (Dordrecht : Springer
Munich: Hanser
Bremen :Zarm:Am Fallturm) pp. 287-296 - issn: 0938-0108 - wos: WOS:000308550300006 (45) - scopus: 2-s2.0-84870249623 (58)
2108/76859 - 2012 -
Production and testing of shape memory composites Santo, Loredana; Quadrini, Fabrizio; Bellisario, Denise - 02 - Intervento a convegno
congresso: The Fourth International Conference on The Characterization and Control of Interfaces for High Quality Advanced Materials ICCCI 2012 (Kurashiki, Japan)
2108/76800 - 2012 -
Nanocompositi a memoria di forma realizzati in schiuma epossidica Santo, Loredana; Quadrini, Fabrizio - 01 - Articolo su rivista
rivista: RIVISTA ITALIANA DI COMPOSITI E NANOTECNOLOGIE (Roma : Esagrafica) pp. 54-58 - issn: 1826-4697 - wos: (0) - scopus: (0)
2108/76888 - 2012 -
Squeeze casting of Al-Si Alloys Bellisario, Denise; Costanza, Girolamo; Tata, Maria Elisa; Quadrini, Fabrizio; Santo, Loredana - 03 - Contributo in libro
libro: Recent Researches in Metallurgical Engineering, From Extraction to Forming - (978-953-51-0356-1)
2108/76799 - 2012 -
Study and characterization of automotive coating repairs Bellisario, Denise; Quadrini, Fabrizio; Santo, Loredana - 01 - Articolo su rivista
rivista: INTERNATIONAL JOURNAL OF MODERN MANUFACTURING TECHNOLOGIES (Romania: Professional Association in Modern Manufacturing Technologies (ModTech Iasi-ROMANIA)) pp. 21-28 - issn: 2067-3604 - wos: (0) - scopus: (0)
2108/76857 - 2012 -
Space mission opportunities using shape memory composites Santo, Loredana; Quadrini, Fabrizio - 02 - Intervento a convegno
congresso: 63rd International Astronautical Congress” IAC 2012 (Napoli)
2108/54127 - 2012 -
Shape Memory Epoxy Foams: New Materials for Aerospace Applications Santo, Loredana - 03 - Contributo in libro
libro: Material Science Forum - (978-3-03785-303-0)
2108/54128 - 2012 -
Nanocomposite coatings: a review Santo, Loredana - 03 - Contributo in libro
libro: Materials and surface engineering: research and development - (978-0-85709-151-2)
2108/76862 - 2012 -
Rubber-toughened long glass fiber reinforced thermoplastic composite Quadrini, Fabrizio; Santo, Loredana - 01 - Articolo su rivista
rivista: INTERNATIONAL JOURNAL OF MANUFACTURING, MATERIALS, AND MECHANICAL ENGINEERING (Hershey, PA : IGI Pub.) pp. 47-58 - issn: 2156-1680 - wos: (0) - scopus: 2-s2.0-84891814168 (2)
2108/76792 - 2012 -
Numerical simulation of open-cell aluminum foams under compression Quadrini, Fabrizio; Bellisario, Denise; Santo, Loredana - 02 - Intervento a convegno
congresso: 15th Conference of the European Scientific Association on Material Forming, (ESAFORM 2012) ()
libro: Esaform 2012 - (978-3-03785-366-5)
Quadrini, Fabrizio; Bellisario, Denise; Santo, Loredana - 03 - Contributo in libro
libro: Lasers in Manufacturing - (978-1-84821-369-2)
2108/193078 - 2012 -
Mission STS-134: results of shape memory foam experiment Santo, Loredana; Quadrini, Fabrizio - 02 - Intervento a convegno
congresso: “63rd International Astronautical Congress” IAC 2012 ()
2108/76858 - 2012 -
Production and testing of shape memory epoxy foams Quadrini, Fabrizio; Santo, Loredana - 02 - Intervento a convegno
congresso: Polymer Foam 2012 (Newark, USA)
2108/76770 - 2012 -
Microstructural modification of laser-bent open-cell aluminum foams Santo, Loredana; Bellisario, Denise; Quadrini, Fabrizio - 02 - Intervento a convegno
congresso: 15th Conference of the European Scientific Association on Material Forming, (ESAFORM 2012) ()
libro: Esaform 2012 - (978-3-03785-366-5)
2108/54125 - 2011 -
Replication casting of open-cell ALSi7Mg0.3 foams Quadrini, Fabrizio; Santo, Loredana - 01 - Articolo su rivista
rivista: MATERIALS LETTERS (Amsterdam Netherlands: Elsevier BV) pp. 2558-2561 - issn: 0167-577X - wos: WOS:000293929300003 (22) - scopus: 2-s2.0-79959572419 (26)
2108/54113 - 2011 -
Diode laser welding of aluminum to steel Santo, Loredana; Quadrini, Fabrizio; Trovalusci, Federica - 02 - Intervento a convegno
congresso: International ESAFORM Conference on Material Forming (Belfas, Ireland)
libro: AIP Conf. Proc. 1353, 1325-1330 (2011) - ()
2108/54092 - 2011 -
Hot Drilling of aluminium matrix composite Santo, Loredana; Tagliaferri, Vincenzo - 03 - Contributo in libro
libro: Advances in Metal Matrix Composites - (978-3-03785-057-2)
2108/54093 - 2011 -
The Application of the Time-temperature Superposition for the Prediction of the Properties of GFRPs Quadrini, Fabrizio; Santo, Loredana; Tagliaferri, Vincenzo; Trovalusci, Federica - 01 - Articolo su rivista
rivista: JOURNAL OF MANUFACTURING TECHNOLOGY RESEARCH (Hauppauge, NY : Nova Science) pp. - - issn: 1943-8095 - wos: (0) - scopus: 2-s2.0-84879747063 (0)
2108/33950 - 2010 -
Flexible forming of thin aluminum alloy sheets Quadrini, Fabrizio; Santo, Loredana - 01 - Articolo su rivista
rivista: REVISTA DE TEHNOLOGII NECONVENTIONALE (Timişoara : Editura Augusta, 1997-1998.
Iaşi: Pim, 2007-) pp. 79-84 - issn: 1454-3087 - wos: (0) - scopus: (0)
2108/49847 - 2010 -
Production of resin coated sand shells by IR heating Santo, Loredana; Quadrini, Fabrizio; Trovalusci, Federica - 02 - Intervento a convegno
congresso: _ ()
libro: Proceedings - ()
Santo, Loredana - 03 - Contributo in libro
libro: Laser Beams: Theory, Properties and Applications - (978-1-60876-266-8)
2108/33951 - 2010 -
A miniaturized machine for micro-sheet forming Quadrini, Fabrizio; Santo, Loredana; Trovalusci, Federica - 01 - Articolo su rivista
rivista: INTERNATIONAL JOURNAL OF MATERIAL FORMING (Paris: Springer Paris) pp. 1091-1094 - issn: 1960-6206 - wos: WOS:000208613700270 (3) - scopus: 2-s2.0-78651596021 (3)
2108/26782 - 2010 -
Custom Painting by means of powder coating and localized heating Quadrini, Fabrizio; Santo, Loredana; Tagliaferri, Vincenzo; Trovalusci, Federica - 01 - Articolo su rivista
rivista: POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (Marcel Dekker Incorporated:270 Madison Avenue:New York, NY 10016:(800)228-1160, (212)696-9000, EMAIL: bookorders@dekker.com, INTERNET: http://www.dekker.com, Fax: (212)685-4540) pp. 164-168 - issn: 0360-2559 - wos: WOS:000283076600007 (7) - scopus: 2-s2.0-75649113755 (6)
2108/26786 - 2010 -
An IR molding system for direct shaping of thermoplastics Quadrini, Fabrizio; Santo, Loredana; Tagliaferri, Vincenzo; Trovalusci, Federica - 01 - Articolo su rivista
rivista: POLYMER ENGINEERING AND SCIENCE (Society of Plastics Engineers:14 Fairfield Drive, PO Box 0403:Brookfield, CT 06804:(203)775-0471, INTERNET: http://www.4spe.org, Fax: (203)775-8490) pp. 2079-2084 - issn: 0032-3888 - wos: WOS:000283479900001 (0) - scopus: 2-s2.0-78249284348 (0)
2108/49826 - 2010 -
Formability of open-cell aluminum foams by laser Santo, Loredana; Quadrini, Fabrizio - 02 - Intervento a convegno
congresso: ASME International Manufacturing Science and Engineering Conference MSEC2010 ()
libro: Proceedings - ()
2108/26780 - 2010 -
Forming of aluminum alloy thin sheets by soft dies Quadrini, Fabrizio; Santo, Loredana - 02 - Intervento a convegno
congresso: ModTech ()
libro: Proceedings - ()
Santo, Loredana - 03 - Contributo in libro
libro: Laser beams: theory, properties and applicationsâ - (978-1-60876-266-8)
2108/45800 - 2010 -
Shape memory epoxy foams for aerospace: experimentation on ISS Santo, Loredana - 02 - Intervento a convegno
congresso: International Astronautical Congress (Prague)
libro: 61st International Astronautical Congress 2010 (IAC 2010) - (9781617823688)
2108/33890 - 2010 -
Numerical simulation of pin squeeze casting process for cycle time and cast property prediction Quadrini, Fabrizio; Santo, Loredana; Tagliaferri, Vincenzo - 01 - Articolo su rivista
rivista: INTERNATIONAL JOURNAL OF COMPUTATIONAL MATERIALS SCIENCE AND SURFACE ENGINEERING ([Olney] : Inderscience, 2007-) pp. 164-174 - issn: 1753-3465 - wos: (0) - scopus: 2-s2.0-77952331334 (2)
2108/36838 - 2010 -
Study of fibre laser machining of C45 steel: influence of process parameters on material removal rate Genna, Silvio; Santo, Loredana; Trovalusci, Federica - 01 - Articolo su rivista
rivista: INTERNATIONAL JOURNAL OF MATERIAL FORMING (Paris: Springer Paris) pp. 1115-1118 - issn: 1960-6206 - wos: (0) - scopus: 2-s2.0-78651582011 (29)
2108/34639 - 2010 -
Implementation of neural network for the thrust force prediction in hot drilling of 6082 aluminium alloy Montanari, Roberto; Santo, Loredana; Tagliaferri, Vincenzo; Ucciardello, Nadia - 01 - Articolo su rivista
rivista: INTERNATIONAL JOURNAL OF COMPUTATIONAL MATERIALS SCIENCE AND SURFACE ENGINEERING ([Olney] : Inderscience, 2007-) pp. 175-187 - issn: 1753-3465 - wos: (0) - scopus: 2-s2.0-77952324201 (3)
2108/53928 - 2009 -
Recycling of thermosets by direct moulding of fine powder Quadrini, Fabrizio; Santo, Loredana; Trovalusci, Federica - 02 - Intervento a convegno
congresso: NewTech 2009 International Conference New Technologies in Manufacturing ()
libro: Proceedings of NewTech 2009 - ()
2108/53916 - 2009 -
Injection moulding of discrete long-glass-fibre reinforced polypropylene (LGFRP) Santo, Loredana; Quadrini, Fabrizio; Tagliaferri, Vincenzo; Trovalusci, Federica - 02 - Intervento a convegno
congresso: ModTech Modern Technologies, Quality and Innovation - New face of TMCR ()
libro: Proceedings of ModTech 2009 - ()
2108/46807 - 2009 -
Selective laser sintering of resin-coated sands Part I: the laser-material interaction Quadrini, Fabrizio; Santo, Loredana - 01 - Articolo su rivista
rivista: JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING (American Society of Mechanical Engineers:22 Law Drive:Fairfield, NJ 07007:(800)843-2763, (973)882-1167, EMAIL: infocentral@asme.org, INTERNET: http://www.asme.org, Fax: (973)882-1717) pp. 011004- - issn: 1087-1357 - wos: WOS:000262852000004 (9) - scopus: 2-s2.0-77955291741 (9)
2108/46801 - 2009 -
Double indentation of laser bended stainless steel sheets Quadrini, Fabrizio; Santo, Loredana - 01 - Articolo su rivista
rivista: INTERNATIONAL JOURNAL OF MATERIAL FORMING (Paris: Springer Paris) pp. 665-668 - issn: 1960-6206 - wos: WOS:000208614900165 (1) - scopus: 2-s2.0-84856039577 (1)
2108/46837 - 2009 -
Laser assisted polymer moulding of small parts Quadrini, Fabrizio; Santo, Loredana; Trovalusci, Federica - 01 - Articolo su rivista
rivista: INTERNATIONAL JOURNAL OF MATERIAL FORMING (Paris: Springer Paris) pp. 669-672 - issn: 1960-6206 - wos: (0) - scopus: 2-s2.0-84856054310 (2)
2108/46833 - 2009 -
Tribological properties of steel blades in cutting of polyurethane soft foams Quadrini, Fabrizio; Santo, Loredana; Trovalusci, Federica - 03 - Contributo in libro
libro: Tribology Research Advances - (978-1-60692-885-1)
2108/46836 - 2009 -
Direct pellet moulding of ABS disks Quadrini, Fabrizio; Santo, Loredana; Trovalusci, Federica - 01 - Articolo su rivista
rivista: INTERNATIONAL JOURNAL OF POLYMERS AND TECHNOLOGIES (Serials Publications) pp. 107-112 - issn: 0973-6743 - wos: (0) - scopus: (0)
2108/46799 - 2009 -
Diode laser cure of thermosetting powders for writing on painted and unpainted metallic surfaces Santo, Loredana; Tagliaferri, Vincenzo; Trovalusci, Federica - 02 - Intervento a convegno
congresso: ASME 2009 International Manufacturing Science and Engineering Conference (MSEC2009) (West Lafayette, Indiana, USA)
libro: Dynamic Thermal Thin Film Processing of Large Areas With High Power Laser Sources
High power laser sources are used in various production tools for cutting, welding and hardening of metal parts and patterning, annealing and lithography of flat panel displays, solar cells and microe...
Modeling of Thermoelastic Stress Wave in Laser-Assisted Cell Direct Writing
Laser-assisted cell direct-write technique has been a promising biomaterial direct-write method. For safe and reproducible cell direct writing, the cell damage due to process-induced external stress m... ASME Conf. Proc. ASME 2009 International Manufacturing Science and Engineering Conference - (978-0-7918-4362-8)
2108/53931 - 2009 -
Improvement of performances of hand laminated composites by fibre pre-heating Santo, Loredana; Quadrini, Fabrizio - 02 - Intervento a convegno
congresso: The 2nd International Conference on Polymers Processing in Engineering PPE 2009 ()
libro: Proceedings of PPE 2009 - ()
2108/53909 - 2009 -
Epoxy nanocomposite foams by solid-state foaming Quadrini, Fabrizio; Lamastra, Francesca Romana; Nanni, Francesca; Santo, Loredana - 02 - Intervento a convegno
congresso: ICCE-17 International Conference on Composites or Nano Engineering ()
libro: Proceedings of ICCE-17 - ()
2108/46835 - 2009 -
Double indentation of laser welded butt joints of stainless steel sheets Santo, Loredana; Trovalusci, Federica - 01 - Articolo su rivista
rivista: KEY ENGINEERING MATERIALS (Trans Tech Publications Limited:Brandrain 6, CH 8037 Uetikon Switzerland:011 41 1 9221022, EMAIL: ttp@ttp.net, INTERNET: http://www.ttp.net, Fax: 011 41 1 9221033) pp. 503-509 - issn: 1013-9826 - wos: WOS:000269209000054 (3) - scopus: 2-s2.0-68649120264 (3)
2108/46794 - 2009 -
Numerical Prediction of Residual Stresses in Laser Bending of Stainless Steel Sheet Metals Quadrini, Fabrizio; Santo, Loredana - 02 - Intervento a convegno
congresso: Esaform 2009 ()
2108/53934 - 2008 -
Processo di verniciatura, in particolare per superfici metalliche (Painting process especially for metal surfaces) Santo, Loredana; Tagliaferri, Vincenzo; Quadrini, Fabrizio; Trovalusci, Federica - 06 - Brevetti e altre privative registrate
2108/55090 - 2008 -
The thermal behaviour of resin coated sands for selective laser sintering Quadrini, Fabrizio; Santo, Loredana; Tagliaferri, Vincenzo - 01 - Articolo su rivista
rivista: INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (Elsevier Science Limited:Oxford Fulfillment Center, PO Box 800, Kidlington Oxford OX5 1DX United Kingdom:011 44 1865 843000, 011 44 1865 843699, EMAIL: asianfo@elsevier.com, tcb@elsevier.co.UK, INTERNET: http://www.elsevier.com, http://www.elsevier.com/locate/shpsa/, Fax: 011 44 1865 843010) pp. 229-253 - issn: 0020-7683 - wos: (0) - scopus: (0)
2108/53893 - 2008 -
Direct molding of thermoplastic micro-parts Quadrini, Fabrizio; Santo, Loredana; Trovalusci, Federica - 01 - Articolo su rivista
rivista: JOURNAL OF MICROMECHANICS AND MICROENGINEERING (IOP Publishing Limited:Dirac House, Temple Back, Bristol BS1 6BE United Kingdom:011 44 117 9297481, EMAIL: custserv@iop.org, INTERNET: http://www.iop.org, Fax: 011 44 117 9294318) pp. 105006-105011 - issn: 0960-1317 - wos: WOS:000259693800023 (5) - scopus: 2-s2.0-58149337440 (7)
2108/54100 - 2008 -
Diode laser welding of polyethylene Quadrini, Fabrizio; Santo, Loredana; Trovalusci, Federica - 01 - Articolo su rivista
rivista: POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (Marcel Dekker Incorporated:270 Madison Avenue:New York, NY 10016:(800)228-1160, (212)696-9000, EMAIL: bookorders@dekker.com, INTERNET: http://www.dekker.com, Fax: (212)685-4540) pp. 655-661 - issn: 0360-2559 - wos: WOS:000257147800003 (1) - scopus: 2-s2.0-47349113834 (3)
2108/55199 - 2008 -
Drilling polymeric matrix composites Santo, Loredana; Tagliaferri, Vincenzo - 03 - Contributo in libro
libro: Machining: Fundamentals and recent advances. - (978-1-84800-212-8)
Santo, Loredana - 01 - Articolo su rivista
rivista: INTERNATIONAL JOURNAL OF SURFACE SCIENCE AND ENGINEERING (Inderscience
IEL EDITORIAL OFFICE,
P O BOX 735
OLNEY,BUCKS.,
MK46 5WB,UK.
Tel : ++ 44 1234 240519
Fax : ++44 1234 240515
Email : editor@inderscience.com) pp. 327-336 - issn: 1749-785X - wos: (0) - scopus: 2-s2.0-57049166414 (44)
2108/53890 - 2008 -
Infrared assisted polymer forming Quadrini, Fabrizio; Santo, Loredana; Trovalusci, Federica - 01 - Articolo su rivista
rivista: INTERNATIONAL JOURNAL OF MATERIAL FORMING (Paris: Springer Paris) pp. 1355-1358 - issn: 1960-6206 - wos: WOS:000208613900338 (3) - scopus: 2-s2.0-78651535353 (4)
2108/54102 - 2008 -
Dynamic mechanical performances of polyester-clay nanocomposite thick films Quadrini, Fabrizio; Santo, Loredana - 01 - Articolo su rivista
rivista: JOURNAL OF COMPOSITE MATERIALS (Technomic Publishing Company Incorporated:2455 Teller Road:Thousand Oaks, CA 91320:(800)233-9936, (717)291-5609, EMAIL: customer@techpub.com, INTERNET: http://www.techpub.com) pp. 2841-2852 - issn: 0021-9983 - wos: WOS:000261546400006 (15) - scopus: 2-s2.0-57549084664 (16)
2108/54110 - 2007 -
Diode laser cure of serigraphic ink Quadrini, Fabrizio; Santo, Loredana; Trovalusci, Federica - 01 - Articolo su rivista
rivista: POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (Marcel Dekker Incorporated:270 Madison Avenue:New York, NY 10016:(800)228-1160, (212)696-9000, EMAIL: bookorders@dekker.com, INTERNET: http://www.dekker.com, Fax: (212)685-4540) pp. 1049-1053 - issn: 0360-2559 - wos: WOS:000251931800018 (1) - scopus: 2-s2.0-36348994900 (3)
2108/54099 - 2007 -
"Surface preparation and coating metal coils by using a fully integrated manufacturing system" Barletta, Massimiliano; Santo, Loredana - 01 - Articolo su rivista
rivista: INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING (Taylor & Francis Limited:Rankine Road, Basingstoke RG24 8PR United Kingdom:011 44 1256 813035, EMAIL: madeline.sims@tandf.co.uk, info@tandf.co.uk, INTERNET: http://www.tandf.co.uk, Fax: 011 44 1256 330245) pp. 452-464 - issn: 0951-192X - wos: WOS:000248333700005 (4) - scopus: 2-s2.0-34547514774 (4)
2108/53878 - 2007 -
Direct pellet moulding of thermoplastic disks Quadrini, Fabrizio; Santo, Loredana; Tagliaferri, Vincenzo; Trovalusci, Federica - 02 - Intervento a convegno
congresso: VIII Convegno AITEM ()
libro: Atti del Convegno - ()
2108/54105 - 2007 -
Micro-punching experiments on thick sheet of pure aluminium Quadrini, Fabrizio; Santo, Loredana; Trovalusci, Federica - 01 - Articolo su rivista
rivista: REVISTA DE TEHNOLOGII NECONVENTIONALE (Timişoara : Editura Augusta, 1997-1998.
Iaşi: Pim, 2007-) pp. 89-92 - issn: 1454-3087 - wos: (0) - scopus: (0)
2108/74870 - 2007 -
Aesthetic diode laser welding of stainless steel Quadrini, Fabrizio; Santo, Loredana; Trovalusci, Federica - 02 - Intervento a convegno
congresso: Sheet Metal 2007 ()
libro: Sheet metal 2007 : procedings of the 12th international conference held at the University of Palermo, Italy april 1st-4th 2007 - (0-87849-437-5)
2108/74869 - 2007 -
Nd-YAG laser sculpture of WC punches for micro-sheet forming Quadrini, Fabrizio; Santo, Loredana; Trovalusci, Federica; Tagliaferri, Vincenzo - 02 - Intervento a convegno
congresso: Sheet Metal 2007 ()
libro: Sheet metal 2007 : procedings of the 12th international conference held at the University of Palermo, Italy april 1st-4th 2007 - (0-87849-437-5)
2108/53850 - 2007 -
Mechanical characterization of metal sheets by means of double indentation Quadrini, Fabrizio; Santo, Loredana - 02 - Intervento a convegno
congresso: Sheet Metal 2007 ()
2108/54117 - 2007 -
Metal tube cutting by means of high power diode laser Quadrini, Fabrizio; Santo, Loredana; Tagliaferri, Vincenzo - 02 - Intervento a convegno
congresso: 8th A.I.Te.M. Conference ()
libro: Proceedings of 8th A.I.Te.M. Conference - ()
2108/53684 - 2007 -
Surface preparation and coating of metal coils by using a fully integrated manufacturing system Barletta, Massimiliano; Santo, Loredana; Tagliaferri, Vincenzo - 01 - Articolo su rivista
rivista: INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING (Taylor & Francis Limited:Rankine Road, Basingstoke RG24 8PR United Kingdom:011 44 1256 813035, EMAIL: madeline.sims@tandf.co.uk, info@tandf.co.uk, INTERNET: http://www.tandf.co.uk, Fax: 011 44 1256 330245) pp. 452-464 - issn: 0951-192X - wos: WOS:000248333700005 (4) - scopus: 2-s2.0-34547514774 (4)
2108/53881 - 2007 -
Injection molding of bushes made of tribological POM: interaction between mold and molded material Quadrini, Fabrizio; Santo, Loredana; Trovalusci, Federica - 02 - Intervento a convegno
congresso: 1st International Conference in Polymers Processing in Engineering, PPE2007 ()
2108/54103 - 2006 -
Hot drilling of 6082 aluminium alloy Santo, Loredana; Trovalusci, Federica; Tagliaferri, Vincenzo - 02 - Intervento a convegno
congresso: 8th Biennial Conference on Engineering Systems Design and Analysis (Turin, ITALY)
libro: Proceedings of the 8th Biennial Conference on Engineering Systems Design and Analysis, Vol 4 - (0791842517)
2108/54104 - 2006 -
Plastic shaping by means of IR heating and direct pellet moulding Quadrini, Fabrizio; Santo, Loredana; Tagliaferri, Vincenzo; Trovalusci, Federica - 01 - Articolo su rivista
rivista: POLYMER ENGINEERING AND SCIENCE (Society of Plastics Engineers:14 Fairfield Drive, PO Box 0403:Brookfield, CT 06804:(203)775-0471, INTERNET: http://www.4spe.org, Fax: (203)775-8490) pp. 896-903 - issn: 0032-3888 - wos: (0) - scopus: 2-s2.0-33746034185 (7)
2108/54124 - 2005 -
PROCESS MONITORING IN Al-Al2O3 POWDER COMPACTION AND SINTERING Santo, Loredana; Quadrini, Fabrizio - 02 - Intervento a convegno
congresso: International Conference “Modern Technologies in the 21 st Century” (Military Technical Academy, Bucarest, Romania)
libro: Proceedings of International Conference "Modern Technologies in the 21° Century" - ()
2108/54120 - 2005 -
PROCESS CONTROL BY USING THE FLAT-TOP CYLINDER INDENTER FOR MECHANICAL CHARACTERIZATION (FIMEC) TEST Guarino, Stefano; Santo, Loredana; Tagliaferri, Vincenzo - 02 - Intervento a convegno
congresso: International Manufacturing Leaders Forum on “Global Competitive Manufacturing” (Adelaide, Australia)
2108/54123 - 2005 -
FLOW INDUCED ANISOTROPY ON STRUCTURAL PROPERTIES OF INJECTION MOULDED PRODUCTS" Quadrini, Fabrizio; Santo, Loredana - 02 - Intervento a convegno
congresso: International Conference “Modern Technologies in the 21 st Century (Military Technical Academy, Bucarest, Romania)
libro: Proceedings of International Conference "Modern Technologies in the 21° Century" - ()
2108/33949 - 2004 -
Laser assisted polymer forming Quadrini, Fabrizio; Santo, Loredana - 02 - Intervento a convegno
congresso: Engineering systems design & analysis (Manchester UK)
libro: ASME 7th Biennial Conference on Engineering Systems Design and Analysis (ESDA2004)
July 19–22, 2004, Manchester, England - (0-7918-4175-8)
2108/53857 - 2004 -
PRODUCTION PROCESS EFFECT ON SHAPE AND MATERIAL PROPERTIES OF INJECTION MOULDED COMPONENTS. A CASE STUDY: THE ROTORS OF LOW PUMPS Quadrini, Fabrizio; Santo, Loredana; Tagliaferri, Vincenzo - 02 - Intervento a convegno
congresso: The 11th International Scientific Technical Conference ()
2108/53853 - 2004 -
COMPATTAZIONE DI MISCELE DI POLVERI DI Al E Al2O3 PER LA FEBBRICAZIONE DI MMC Quadrini, Fabrizio; Santo, Loredana - 02 - Intervento a convegno
congresso: 30° Convegno Nazionale AIM ()
2108/54121 - 2004 -
Production Process Effect on Shape and Material Properties of Injection Moulded Components Santo, Loredana; Tagliaferri, Vincenzo - 02 - Intervento a convegno
congresso: Conference "Mashinostroenie i technosfera XXI veka", tome 4, The 11th International Scientific Technical Conference (Sevastopol (Ukraine))
2108/54122 - 2004 -
Wear and surface finishing of components manufactured by using the sintering process Barletta, Massimiliano; Santo, Loredana; Tagliaferri, Vincenzo - 02 - Intervento a convegno
congresso: 2nd International Conference on Tribology in Manufacturing Processes (Nyborg, Denmark)
2108/112313 - 2003 -
Thermoplastic pellet joining by means of diode laser Quadrini, Fabrizio; Santo, Loredana; Tagliaferri, Vincenzo - 02 - Intervento a convegno
congresso: VI AITEM Conference (Cassino-Gaeta)
Barletta, Massimiliano; Santo, Loredana; Tagliaferri, Vincenzo - 02 - Intervento a convegno
congresso: VI AITEM Conference (Gaeta)
2108/112147 - 2002 -
Application fields of the filament winding process: Temperature and material Analysis Barletta, Massimiliano; Guarino, Stefano; Santo, Loredana; Tagliaferri, Vincenzo - 02 - Intervento a convegno
congresso: Biennal Conference on Engineering Systems Design and Analysis (Istanbul, Turkey)
2108/111733 - 2002 -
Industrial Sustainability applied to composite fabrication Santo, Loredana; Tagliaferri, Vincenzo - 02 - Intervento a convegno
congresso: Biennal Conference on Engineering Systems Design and Analysis (Instabul, Turkey)
2108/112081 - 2002 -
Thermal exchange phenomena in calendering of polymeric material Santo, Loredana; Guarino, Stefano; Tagliaferri, Vincenzo - 02 - Intervento a convegno
congresso: Biennal Conference on Engineering Systems Design and Analysis (Instabul, Turkey)
2108/193074 - 2001 -
Numerical modelling of filament-wound composite structures Quadrini, Fabrizio; Santo, Loredana; Tagliaferri, Vincenzo - 02 - Intervento a convegno
congresso: “V Convegno A.I.Te.M.” ()
2108/193076 - 2001 -
Investigation of electron beam technology applied to polymer processing Barletta, Massimiliano; Quadrini, Fabrizio; Santo, Loredana; Tagliaferri, Vincenzo - 02 - Intervento a convegno
congresso: “V Convegno AITEM” ()
2108/111873 - 2001 -
A view of industrial sustainability applied to Productive process Santo, Loredana; Tagliaferri, Vincenzo - 02 - Intervento a convegno
congresso: International Conference PRIME (Sestri Levante, Genoa)
libro: Atti del 1st International Conference PRIME 2001 - ()
2108/112131 - 2001 -
The importance of thermal conductivity variation in the SLS process Quadrini, Fabrizio; Santo, Loredana; Tagliaferri, Vincenzo - 02 - Intervento a convegno
congresso: International Thermal Conductivity Conference (Cambridge (Massachusetts, USA))
2108/112393 - 2001 -
The prediction of sand behaviour in the SLS process Quadrini, Fabrizio; Santo, Loredana; Tagliaferri, Vincenzo - 02 - Intervento a convegno
congresso: International Conference PRIME 2001 (Sestri Levante, Genoa)
2108/112275 - 2001 -
Technological application of the fluidized bed. Barletta, Massimiliano; Santo, Loredana; Tagliaferri, Vincenzo - 02 - Intervento a convegno
congresso: AITEM Conference ()
2108/112129 - 2000 -
Analysis of Material Properties Employed in Selective Laser Sintering Technology Quadrini, Fabrizio; Santo, Loredana; Tagliaferri, Vincenzo - 02 - Intervento a convegno
congresso: Proceedings of the 5th biennial Conf. on Engineering Systems Design and Analysis (Montreux, Suisse)
libro: Proceedings of the 5th biennial Conf. on Engineering Systems Design and Analysis, - ()
2108/111669 - 2000 -
Extension of orthogonal cutting model of composite materials to drilling Santo, Loredana; Tagliaferri, Vincenzo - 02 - Intervento a convegno
congresso: Proceedings of the 5th biennial Conf. on Engineering Systems Design and Analysis (Montreux, Suisse)
libro: Proceedings of the 5th biennial Conf. on Engineering Systems Design and Analysis - ()
2108/373483 - 1998 -
Interpretation of size effect in orthogonal machining of composite materials. Part I: Unidirectional glass-fibre-reinforced plastics Santo, Loredana - 01 - Articolo su rivista
rivista: COMPOSITES. PART A: APPLIED SCIENCE AND MANUFACTURING (ELSEVIER SCI LTD, THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD, ENGLAND, OXON, OX5 1GB
011 44 1865 843000, 011 44 1865 843699, EMAIL: nlinfo-f@elsevier.nl OR usinfo-f@elsevier.com OR forinfo-kyf04035@niftyserve.or.jp, INTERNET: http://www.elsevier.nl/, Fax: 011 44 1865 843010) pp. 887-892 - issn: 1359-835X - wos: WOS:000075504800002 (24) - scopus: 2-s2.0-0031640519 (32)
2108/373485 - 1998 -
Interpretation of size effect in orthogonal machining of composite materials. Part II: Sheet moulding compound Santo, Loredana - 01 - Articolo su rivista
rivista: COMPOSITES. PART A: APPLIED SCIENCE AND MANUFACTURING (ELSEVIER SCI LTD, THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD, ENGLAND, OXON, OX5 1GB
011 44 1865 843000, 011 44 1865 843699, EMAIL: nlinfo-f@elsevier.nl OR usinfo-f@elsevier.com OR forinfo-kyf04035@niftyserve.or.jp, INTERNET: http://www.elsevier.nl/, Fax: 011 44 1865 843010) pp. 893-897 - issn: 1359-835X - wos: WOS:000075504800003 (12) - scopus: 2-s2.0-0031620866 (14)
2108/373463 - 1996 -
Dependence of the coefficient of friction on fibre orientation in the sliding of a HSS punch on a unidirectional CFRP surface Santo, Loredana - 03 - Contributo in libro
libro: Composite materials manufacturing, fatigue, fracture,: proceedings of the III Biennial ESDA conference - (9780791814987)
2108/373471 - 1996 -
Effect of tool wear on cutting forces in the orthogonal cutting of unidirectional glass fibre-reinforced plastics Santo, Loredana - 01 - Articolo su rivista
rivista: COMPOSITES. PART A: APPLIED SCIENCE AND MANUFACTURING (ELSEVIER SCI LTD, THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD, ENGLAND, OXON, OX5 1GB
011 44 1865 843000, 011 44 1865 843699, EMAIL: nlinfo-f@elsevier.nl OR usinfo-f@elsevier.com OR forinfo-kyf04035@niftyserve.or.jp, INTERNET: http://www.elsevier.nl/, Fax: 011 44 1865 843010) pp. 409-415 - issn: 1359-835X - wos: WOS:A1996UD19400008 (46) - scopus: 2-s2.0-0029736488 (48)
2108/373484 - 1996 -
On the origin of cutting forces in machining unidirectional composite materials Santo, Loredana - 03 - Contributo in libro
libro: Proceedings of the 1996 3rd Biennial Joint Conference on Engineering Systems Design and Analysis, ESDA. Part 7 - ()