EUGENIO PEZZUTI

Associate professor

email: pezzuti@mec.uniroma2.it
phone: 0672597139
building: edificio industriale
room: 1050/28

https://www.scopus.com/authid/detail.uri?authorId=8311352000
Eugenio Pezzuti graduated in mechanical engineering at University of Rome - La Sapienza, 1986 Technical Assistant at University of Rome - Tor Vergata from 1985 to 1988 Researcher from 1988 to 1998 at University of Rome - Tor Vergata. In his career has made many courses like oleodynamic at University of Cassino, mechanical design, cad ecc. Since 1.11.1998 is Associated Professor at University of Rome _ Tor Vergata, where is titular of following courses: machine drawing 1, machine drawing 2, computer aided design The scientific activity has been developed also in the following areas: Development of design methodologies CAD Image Analysis Analysis and recognition of errors of form and roughness Structural behaviour of the mechanical elements Reverse engineering Virtual reality Biomechanics

Publications


Papers and Books


[A1] E. Pezzuti, R.M. Strollo, "Il rilievo di meccanismi per una metodologia didattica nell'insegnamento del disegno meccanico", Rivista: Istruzione Tecnica e Professionale, nuova serie anno XXIV, n.89, Gen./Mar., 1987, pp.52,61


[A2] E. Pezzuti, R.M. Strollo, "L'assonometria esplosa come metodo operativo di ausilio nella didattica del disegno di macchine e di meccanismi", Rivista: Istruzione Tecnica e Professionale, nuova serie anno XXIV, n.90, Apr./Giu., 1987, pp.150,161


[A3] C. Brutti, E. Pezzuti, "Rigidezza flessionale di alberi con cricche trasversali", Rivista: Organi di trasmissione, n.4/1988, pp.36,44, ISSN: 0030-4905


[A4] S. Missori, E. Pezzuti, A. Sili, "Valutazione delle tensioni termiche in un nuovo tipo di disco freno ferroviario", Rivista: Organi di trasmissione, feb. 1990, ISSN: 0030-4905


[A5] E. Pezzuti, R. M. Strollo, "CAD e normativa: un'esperienza didattica", Rivista: Istruzione Tecnica e Professionale, terza serie, anno I, Ott/Dic. 1990 pp. 38-43.


[A6] C. Brutti, M. Conte, E. Pezzuti, V. Vullo "Analisi all'instabilità di giunti a T per impiego automobilistico", Rivista: ATA, num. Ott. 1993, pp.464-469, ISSN: 0001-2661


[A7] E. Pezzuti, "La formazione di cricche nei dischi freno ferroviari. Analisi elastoplastica delle tensioni dovute ai transitori termici", Rivista: Istruzione tecnica e professionale, n.1/1994.


[A8] E. Pezzuti, "Analisi delle tensioni nei serbatoi cilindrici interrati per lo stoccaggio in pressione di liquidi pericolosi", Rivista: Istruzione Tecnica e Professionale, Ott./Dic., n.4, 1994 pp.47-56


[A9] E. Pezzuti, "Una procedura automatizzata per il calcolo di ingranaggi per alberi paralleli con più ruote in presa secondo la normativa UNI-8862", Rivista: Organi di trasmissione, apr. 1996, ISSN: 0030-4905


[A10] S. Missori, E. Pezzuti, "Caratterizzazione meccanica ed analisi microstrutturale di una lega di alluminio tipo 6082", Rivista Italiana della saldatura, anno XVIII n.3, 1996. ISSN: 0035-6794


[A11] Pezzuti E., Missori S., "Microstuctural and mechanical characteristics of welded joints in type 6082-T6 aluminium alloy. Welding International(UK), 11, (6), 468-474, 1997, ISSN: 0950-7116. 2-s2.0-85011141915


[A12] C. Brutti, E. Pezzuti, G. Cappellini, “Analisi Tribologica di una Protesi d’anca”, rivista di ortopedia SIPAL, vol.II – Fasc.1-2, Dicembre 1998, pp.1,13


[A13] E. Pennestrì, S. Missori, E. Pezzuti, “ProMEC: un programma interattivo per l’analisi e la sintesi di meccanismi articolati piani”, Libro “Progettazione e fattibilità dei prodotti industriali, Diseno y fabricabilidad de los productos industriales”, (a cura di) Lanzotti A. e Catalano, S. Giannini Editore (ISBN 88-900081-3-X), Napoli, marzo 1999


[A14] E. Pennestrì, E. Pezzuti, U. Tarantino, “Disamina ed applicazione di metodi numerici per l'estrazione dei parametri di movimento”, ISTISAN CONGRESSI, ISSN: 0393-5620. 1999


[A15] E. Pezzuti, A. Ubertini, P.P. Valentini, M. Milana, R. Di Leginio, “Una Metodologia per l’Analisi e l’Archiviazione di Reperti Archeologici basata sul Rilievo mediante Scanner Laser Tridimensionali a Non-Contatto” Libro “Archiviazione e restauro di reperti archeologici mediante tecniche CAD-RP”, pp.45-86, codice ISBN 88-9000081-7-2, Officine Grafiche Francesco Giannini & Figli S.p.A., Napoli, Italia, 2004


[A16] E. Pezzuti, A. Ubertini, P.P. Valentini, L. Vita, “An Integrated Tool For Design, Shape Modelling And Performance Analysis Of 3d Cam” International Journal of Computer Application in Technology, Vol. 23, No. 2/3/4, pp. 185-191, 2005, , Inderscience Publishers, Geneva, SWITZERLAND, ISSN 0952-8091, DOI 10.1504/IJCAT.2005.006480. 2-s2.0-15844371948


[A17] E. Pezzuti, P. Diotallevi, E. Moglioni, A. Pierazzini, G. Laganà, “L’implantologia orale oggi: tecniche chirurgiche attuali, cenni storici, aspetti radiologici e note di biomeccanica”, Bollettino della scuola medica ospedaliera, anno XI, n.25, ott.-dic..2005


[A18] E. Pezzuti, P. Diotallevi, E. Moglioni, Emanuela Rastelli, “Alterazioni radiologiche del canale mandibolare e aspetti biomeccanici correlati”, Bollettino della scuola medica ospedaliera, anno XII, numero 26, apr.-giu. 2006


[A19] E. Pezzuti, P.P. Valentini, L. Vita, E. Pennestrì, “Computer Aided Virtual Reconstruction of Italian Ancient Clocks”,COMPUTER ANIMATION AND VIRTUAL WORLDS,Dic. 2006, n.17,vol.6, ppg. 565-572, Wiley InterScience, 2006, ISSN: 1546-4261.


[A20] E. Pezzuti, R. Stefanelli, P.P. Valentini, L. Vita, “Computer Aided Simulation and Testing of Spatial Linkages with Mechanical Errors” International Journal For Numerical Methods in Engineering, 65: 1735-1748, 2006. 2-s2.0-33751505296. 2-s2.0-33644823029


[A21] Gattamelata D., Pezzuti E., Valentini, P.P., "Accurate geometrical constraints for the computer aided modelling of the human upper limb", Computer Aided Design (special Issue on Human Modelling and Applications), volume 39, n.7, July 2007, ppp.540-547, ISSN 0010-4485. 2-s2.0-34249890780


[A22] P. Diotallevi, E. Moglioni, E. Pezzuti, A. Pierazzini (†), M. E. Pasqualini**, P. Floris, “Correlazioni biomeccaniche-radiologiche nel riassorbimento osseo perimplantare. Studio comparativo su 47 soggetti”, DoctorOS, Anno XVIII, 2 Febbraio 2007, pp.117-123, ISSN 1120-7140


[A23] P.P. Valentini, Pezzuti E., G. Piscopo, A. Ubertini, “La rugosità: i parametri, le misure e l’influenza nella progettazione”. Libro: Disegno tecnico industriale TORNINCASA S., CHIRONE E. TORINO, Ed. Il Capitello, ISBN/ISSN: 978-1-60741-669-6, 2007


[A24] E. Pezzuti, G. Piscopo, D. Gattamelata, "Dimensional and geometrical tolerance synthesis based on constrained optimization: an industrial case" International Journal of Computer Application in Technology, special issue on “Virtual Design of Industrial Systems with Manufacturing and Assembling Errors", Inderscience Publishers, Geneva, SWITZERLAND , ISSN 0952-8091, Vol. 33, No. 1, 2008, ppg.33-40, doi>10.1504/IJCAT.2008.021883. 2-s2.0-57349191040&


[A25] P. Diotallevi, E. Moglioni, E. Pezzuti, A. Pierazzini, M. Pasqualini, P. Floris. (2008). Wspó?zale?no?ci biomechaniczno- radiologiczne w przypadku resorpcji oko?owszczepowej tkanki kostnej. Badanie porównawcze 47 przypadków klinicznych. MAGAZYN STOMATOLOGII ESTETYCZNEJ. vol. 2/08, pp. 20-24 ISSN: 1896-5067.


[A26] G. Piscopo, E. Pezzuti, P.P. Valentini, “Three-dimensional finite-element analysis of immediate loading dental implants” Journal of Biomechanical Science and Engineering, The Japan Society of Mechanical Engineers, VOL.3, ppg. 312-323, ISSN 1880-9863, http://dx.doi.org/10.1299/jbse.3.312, JST.JSTAGE/jbse/3.312. 2-s2.0-78651574225


[A27] P.P. Valentini, E. Pezzuti “L’impatto dell’evoluzione dei sistemi CAD nella didattica del Disegno di Macchine”, Collana di studi e ricerche sul Disegno dell’Architettura e dell’Ambiente vol. IV, “Rappresentazione e formazione tra ricerca e didattica”, Aracne editrice, Roma, ISBN 978-88-548-1633-6, maggio 2008


[A28] P. Diotallevi, E. Moglioni, E. Pezzuti, L. Boffa, G. Ferrante, M. Pasqualini, P. Floris (2008), “Lesioni post-implantari indirette del nervo alveolare, aspetti radiologici e biomeccanici”, ORAL & IMPLANTOLOGY, 2008, vol. 2; p. 79-83, ISSN: 1974-5648


[A29] E. Pezzuti, P. Diotallevi, E. Moglioni, A. Pierazzini, M. Pasqualini, P. Floris, “Success rates in subjects rehabilitated with immediate loading technique on according to AISI guidelines”, ANNALI DI STOMATOLOGIA, ISSN: 1824-0852, volume LVII (1-2): ppg.19-23, 2007


[A30] E. Pezzuti, D. Gattamelata, “Personalizzazione dei programmi CAD attraverso le interfacce di programmazione”, Il Progettista Industriale, Anno 29, Gennaio 2009, n.1, ppp.24-26, ISSN: 0392-4823


[A31] PEZZUTI E., “Aspetti biomeccanici nell'interazione impianto-osso e quadri radiologici correlati”, In libro: DIOTALLEVI P., MOGLIONI E. Diagnostica per immagini in implantologia orale. p. 147-158, CIC Edizioni Internazionali, ISBN/ISSN: 978-88-7141-832-2(2009).


[A32] E. Pezzuti, P.P. Valentini, “Interactive multibody simulation in augmented reality”,Journal of Theoretical and Applied Mechanics, vol. 48, n.3, pp. 733-750, 2010. Warsaw. ISSN 1429-2955. 2-s2.0-77955694882


[A33] E. Pezzuti, P.P. Valentini, D. Gattamelata, “Virtual engineering in augmented reality”,Computer Animation, series “Computer Science, Technology and Applications, Ed. J.S. Wright and L.M. Hughes, pp. 57-83, Nova Science Publisher, 2011, New York, ISBN 978-1-60741-669-6, 2-s2.0-84863449665


[A34] P.P. Valentini, E. Pezzuti, “Effects of geometrical and dimensional errors on kinematics and dynamics of Tracta coupling [Wp?yw b?e{ogonek}dów geometrycznych i wymiarowych na kinematyke{ogonek} i dynamike{ogonek} przegubu równobie?nego typu tracta] ”, Journal of Theoretical and Applied Mechanics, Vol 49, n. 1, 2011, ISBN 1429-2955. 2-s2.0-79551595796


[A35] L. Piancastelli, L. Frizziero, S. Marcoppido, E. Pezzuti “A Fuzzy Control Algorithm for the Electronic Stability Program optimized for tyre burst control”, arxiv.org, Cornell University, 8 Aprile 2011, Bibliographic Code: 2011arXiv1104.1582P


[A36] L. Piancastelli, L. Frizziero, S. Marcoppido, E. Pezzuti “Applying whole system design in a sportscar factory”, arxiv.org, Cornell University, 15 Luglio 2011, Bibliographic Code: 2011arXiv1107.3085P


[A37] L. Piancastelli, L. Frizziero, S. Marcoppido, E. Pezzuti “Revised KAD Tool To Optimize F1 Cars Through A Combined-Elitarian Genetic-Fuzzy Algorithm”, Elsevier “Journal of King Saud University - Engineering Sciences”, Volume 24, Issue 2, July 2012, ISSN 1018-3639. doi: 10.1016/j.jksues.2011.06.006,2-s2.0-84929305317, http://www.sciencedirect.com/science/article/pii/S1018363911000651


[A38] L. Piancastelli, L. Frizziero, S. Marcoppido, A. Donnarumma, E. Pezzuti “FUZZY CONTROL SYSTEM FOR RECOVERING DIRECTION AFTER SPINNING”; “INTERNATIONAL JOURNAL OF HEAT & TECHNOLOGY”, Vol. 29, 2011, pp. 87-93, Edizioni E.T.S, ISSN: 0392-8764, 2-s2.0-84856376509


[A39] L. Piancastelli, L. Frizziero, S. Marcoppido, A. Donnarumma, E. Pezzuti, “ACTIVE ANTISKID SYSTEM FOR HANDLING IMPROVEMENT IN MOTORBIKES CONTROLLED BY FUZZY LOGIC”; “INTERNATIONAL JOURNAL OF HEAT & TECHNOLOGY”, Vol. 29, 2011, pp. 95-101, Edizioni E.T.S, ISSN: 0392-8764, 2-s2.0-84856385420


[A40] ] L. Piancastelli, L. Frizziero, S. Marcoppido, A. Donnarumma, E. Pezzuti, “FUZZY LOGIC CONTROLLING MOTORBIKES ANTISKID”, Far East Journal of Electronics and Communications, Volume 8, Issue, Pages 35 - 53 (March 2012), ISSN: 0973-7006


[A41] L. Piancastelli, L. Frizziero, E. Morganti, E. Pezzuti, “Method for Evaluating the Durability of Aircraft Piston Engines”, Walailak Journal of Science and Technology (WJST), DOI 10.2004/vol10iss1pp, ISSN: 1686-3933, Online ISSN: 2228-835X, vol. 10, n.1, 24.9.2012 http://wjst.wu.ac.th/index.php/wjst/article/view/315/252, 2-s2.0-84885621855


[A42] L. Piancastelli, L. Frizziero, E. Morganti, E. Pezzuti, “Methodology to evaluate aircraft piston engine durability”, International Journal of Heat and Technology, Volume 30, Issue 1, 2012, Pages 89-92, Edizioni E.T.S. ISSN: 0392-8764, 2-s2.0-84867145918


[A43] Pezzuti E. , Valentini P.P., “Design and interactive simulation of cross-axis compliant pivot using dynamic splines” INTERNATIONAL JOURNAL ON INTERACTIVE DESIGN AND MANUFACTURING,2013, Volume 7, Issue 4, November 2013, Pages 261-269, ISSN: 1955-2513, DOI: 10.1007/s12008-012-0180-x, 2-s2.0-84887607449


[A44] L. Piancastelli, L. Frizziero, E. Pezzuti, “AIRCRAFT DIESEL ENGINES CONTROLLED BY FUZZY LOGIC”, ARPN Journal of Engineering and Applied Sciences, Volume 9, Issue 1, January 2014, Pages 30-34, ISSN 1819-6608, 2-s2.0-84894387428


[A45] Pezzuti, E., Valentini, P.P., Piancastelli, L., Frizziero, L., “Development of a modular system for drilling aid for the installation of dental implants”, ARPN Journal of Engineering and Applied Sciences, VOL. 9, Volume 9, Issue 9, 2014, Pages 1527-1534, ISSN 1819-6608, 2-s2.0-8490727275


[A46] Pezzuti, E., Donnici, G., “FEM analysis for critical components in engines systems”, ARPN Journal of Engineering and Applied Sciences, Volume 9, Issue 9, 2014, Pages 1672-1679, ISSN 1819-6608, 2-s2.0-84907272626


[A47] Piancastelli, L., Frizziero, L., Pezzuti, E., “Kers applications to aerospace diesel propulsion”,ARPN Journal of Engineering and Applied Sciences,Volume 9, Issue 5, 2014, Pages 807-818, ISSN 1819-6608, 2-s2.0-84901191389


[A48] Pezzuti, E. , Donnici, G., “Car stability controlled by fuzzy algorithm”, ARPN Journal of Engineering and Applied Sciences, Volume 9, Issue 9, 2014, Pages 1621-1628, ISSN 1819-6608, 2-s2.0-84907260436


[A49] Pezzuti, E. , Donnici, G., “Structural composite for aircraft design”, ARPN Journal of Engineering and Applied Sciences, Volume 9, Issue 10, 2014, ISSN 1819-6608; 2-s2.0-84908400022


[A50] Pezzuti, E. , Donnici, G., Rocchi I., “Aircraft diesel engine turbocompound optimized”, Far East Journal of Electronics and Communications, Volume 13, Issue 2, 1 December 2014, Pages 137-154, ISSN: 09737006, 2-s2.0-84921950060


[A51] Pezzuti, E., Donnici, G., Rocchi I.,Frizziero L., “Aircraft diesel engine turbocompound optimized”,JP Journal of Heat and Mass Transfer,Volume 11, Issue 2, 1 May 2015, Pages 133-150,Publisher: Pushpa Publishing House, ISSN: 09735763, DOI: 10.17654/JPHMTMay2015_133_150, 2-s2.0-84930713388


[A52] Pezzuti E., Valentini P.P. ,”Computer-aided tolerance allocation of compliant ortho-planar spring mechanism “, International Journal of Computer Applications in Technology, 2016, Volume 53, Issue 4, 2016, Pages 369-374, ISSN: 09528091, DOI: 10.1504/IJCAT.2016.076801, Publisher: Inderscience Enterprises Ltd., 2-s2.0-84977630094


[A53] Enrico Moglioni, Eugenio Pezzuti, Tomasz Grotowski, Luca Dal Carlo, Mike Shulman, Paolo Diotallevi, “Oral implantology today: surgical protocol, historical facts, diagnostic imaging, biomechanical notes”, Implants. international magazine of oral implantology, Issue 4. 2016, pages 44-53, issn 1868-3207, Publisher: TU.E.OR. Srl - 2016


[A54]Pezzuti E., Valentini P.P. ,”Accuracy in fingertip tracking using Leap Motion Controller for interactive virtual applications“, International Journal on Interactive Design and Manufacturing,

Volume 11, Issue 3, 1 August 2017, Pages 641-650, ISSN: 19552513, DOI: 10.1007/s12008-016-0339-y, Publisher: Springer-Verlag France, 2-s2.0-84976863781


[A55] Piancastelli, L., Pirazzini, A., Cremonini, M., Cassani, S. Calzini, F., Pezzuti, E., “The optimization of power generation in low-cost Massproduced wheeled wind turbines”, ARPN Journal of Engineering and Applied Sciences, 2018, vol. 13 n.15, pp. 4466-4474, ISSN 1819-6608, 2-s2.0-85051948190


[A56] Piancastelli, L., Cassani, S., Calzini, F., Pezzuti, E., “The decisive advantage of CRDID on spark-ignition piston engines for general aviation: Propeller and engine matching for a specific aircraft”, ARPN Journal of Engineering and Applied Sciences, 2018, vol. 13 n.13, pp. 4244-4252, ISSN 1819-6608, 2-s2.0-85050128885


[A57] Piancastelli, L., Errani, V., Cassani, S., Calzini, F., Pezzuti, E., “An analytical solution for the determination of the loads acting on a semi-elliptical wing: The case of the Reggiane Re 2005 WWII fighter”, ARPN Journal of Engineering and Applied Sciences, 2018, vol. 13 n.14, pp. 4393-4400, ISSN 1819-6608, 2-s2.0-85051038646


[A58]Luca Piancastelli, Raimondo Alberto Bernabeo, Marco Cremonini, Stefano Cassani, Federico Calzini and Eugenio Pezzuti, “Optimized parachute recovery systems for remote piloted aerial systems (RPAS)”, ARPN Journal of Engineering and Applied Sciences, 2018, vol. 13 n.16, ISSN 1819-6608, 2-s2.0-85053142817


[A59]Luca Piancastelli, Stefano Cassani, Eugenio Pezzuti and Lorenzo Pompei, “Multi-objective optimization of the cooling system of a diesel helicopter”, ARPN Journal of Engineering and Applied Sciences, 2018, vol. 13 n.16, ISSN 1819-6608, 2-s2.0-8505315110


[A60]Piancastelli, L., Cassani, S., Calzini, F., Pezzuti, E., Cremonini, M, “Intake and exhaust position optimization in the cooling duct of diesel helicopters”,ARPN Journal of Engineering and Applied Sciences, Volume 13, Issue 17, 1 September 2018, Pages 4811-4819, 2-s2.0-85054270206


[A61] Luca Piancastelli , Eugenio Pezzuti, Stefano Cassani, “Flow Analysis of Multiple Injectors in High-Power-Density HSDI CR Diesel Engines”, Defect and Diffusion Forum, vol.388, pgg.1-13, Publisher: Trans Tech Publications, 2018, ISSN 1662-9507, DOI: 10.4028/www.scientific.net/DDF.388.1


[A62] Piancastelli, L., Cassani, S., Pezzuti, E., Cremonini, M., Bragaglia, L., “Feasibility study of the installation of an additional "over lift wing on the ch47 Chinook for cruise performance improvement through the lift-compound approach”, ARPN Journal of Engineering and Applied Sciences, Volume 13, Issue 19, 1 October 2018, Pages 8142-8149, ISSN 1819-6608


[A63] Piancastelli, L., Cassani, S., Pezzuti, E., Cremonini, M., Colautti, D., Torre A., “FEASIBILITY STUDY AND PRELIMINARY DESIGN OF A RAM-PU LSEJET FOR HYPERSONIC PASSENGER AIR TRANSPORT”ARPN Journal of Engineering and Applied Sciences, VOL. 13, Pages 8356-8365, NO. 20, OCTOBER 2018, ISSN 1819-6608


Proceedings


[B1] S. Missori, E Pezzuti, A. Sili, "Evaluation of fatigue lifetime of railway brake disk", Conf. Fatigue And stress of engineering materials and components, Imperial College IITT, London, 21,22 Sett. 1988


[B2] S. Missori, E. Pezzuti, A. Sili, "Analisi numerica delle tensioni termiche nei dischi freno ferroviari", Atti XVI Congresso AIAS, 20,24 Sett. 1988, Facoltà di Ingegneria dell'Aquila


[B3] S. Missori, E. Pezzuti, A. Sili, "Valutazione delle tensioni termiche in un nuovo tipo di disco freno ferroviario", Atti XVII Congresso AIAS, 12,16 Sett. 1989, Facoltà di Ingegneria di Ancona


[B4] C. Brutti, E. Pezzuti, V. Vullo, "Comportamento strutturale dei collegamenti filettati", Atti Convegno "Organi delle Macchine", 7 Giu. 1990, Politecnico di Milano


[B5] C. Brutti, E. Pezzuti, E.M. Puntillo, V. Vullo, "Stress analysis in spot welded and laser welded T-joints in cold formed shell", Atti Int. Conf. ICED '90, 28-30 Ago. 1990, Dubrovnik (YU).


[B6] N. Bachschmid, D. Del Vescovo, E. Pezzuti, "Sforzi e deformazioni nell'intorno di una discontinuità in un albero assialsimmetrico in differenti condizioni di carico", Atti Congresso AIMETA, 2-5 ott. 1990, Pisa


[B7] C. Brutti, E. Pezzuti, P. Salvini, V. Vullo, "Static behaviour of shafts with transversal crack subjected to elastic plastic stress", Inter. Machinery and Monitoring Conf., 22,25 Ott. 1990, Los Angeles, California, U.S.A.


[B8] C. Brutti, E. Pezzuti "Fatigue life prediction for tubular threaded joints", IITT, MAT-TEC 92, 14-16 Ott. 1992, Grenoble (FR)


[B9] C. Brutti, E. Pezzuti, S. Tassi, "Ottimizzazione del montaggio mediante accoppiamenti flangiati di pezzi di forma assialsimmetrica con errori di forma", Atti VII Convegno ADM 1993, Castelfranco Veneto (TV)


[B10] E. Pezzuti, "Una procedura automatizzata per il calcolo di ingranaggi per alberi paralleli con più ruote in presa secondo la normativa UNI-8862", Atti IX Convegno ADM, Caserta, 27-29 Sett. 1995


[B11] E. Pezzuti, "I colori nei disegni tecnici: una proposta di codificazione", Workshop ADM-ATA, 17.2.1995, Università di Trento, Fac. di Ing.


[B12] C. Brutti, E. Pezzuti, "La qualità nella progettazione: sviluppo ed uso di programmi applicativi CAD", Atti IX Conv. ADM, Caserta, 27-29 Sett. 1995


[B13] E. Pennestrì, E. Pezzuti, A. Paolucci, “Simulazione dei movimenti di meccanismi articolati complessi mediante programmi CAD di tipo commerciale”, Seminario Italo-Spagnolo di Disegno di Macchine e Progettazione Industriale, Univ. Di Napoli Federico II, 25-27 Giugno 1996


[B14] C. Brutti, E. Pezzuti, E. Gullì, “Integrated design of oleo-hydraulic circuits”, X Congresso Internazionale ADM, 17-19 Sett. 1997, Firenze


[B15] E. Pennestrì, S. Missori, E. Pezzuti, “ProMEC: un programma interattivo per l’analisi e la sintesi di meccanismi articolati piani”, II Seminario Italo-Spagnolo, Vico Equense (Napoli), 24-26 Giugno 1998


[B16] M. Biancolini, E. Pezzuti, “A virtual device for testing sunglasses”, XI Congresso Internazionale di Ingegneria Grafica, Universidad de la Rioja y Universidad de la Navarra, Pamplona-Logroño, Spain, 2-4 giugno 1999, vol.I, pp.571-578


[B17] C. Brutti, E. Pezzuti, “La valutazione quantitativa del livello di qualità degli elaborati grafici prodotti con programmi CAD e moduli CAD applicativi”, XI Congresso Internazionale ADM, 8-12 Dic. 1999, Palermo


[B18] E. Pennestrì, F. Petti, E. Pezzuti, “Analisi e sintesi di rotismi per grandi orologi”, XI Congresso Internazionale ADM, 8-12 Dic. 1999, Palermo


[B19] E. Pezzuti, E. Pennestrì, F. Mazzoni, “Wearing evaluation of turning tools by digital image processing”, II Congreso Iberoamericano de Expresion Grafica, 22-24 Settembre 1999, Salta, Argentina


[B20] E. Pezzuti, M.E. Biancolini, M. Postinghel, “Numerical analysis of the effects of roughness and shape errors on squeeze lubrication in traditional hip joint prosthesis”, II Congreso Iberoamericano de Expresion Grafica, 22-24 settembre 1999, Salta, Argentina


[B21] Biancolini M., Postinghel M., E. Pezzuti, “Valutazione della rugosità e degli errori di forma nelle protesi d’anca tradizionali e loro effetti sulle condizioni di lubrificazione”, XI Congresso Internazionale ADM, 8-12 Dic. 1999, Palermo


[B22] E. Pezzuti, E. Pennestrì, E. Gabrielli, “Diseño CAD de una máquina de geometría variable para el moldeado de sistemas de postura”, XII Congreso Internacional de Ingeniería Gráfica, Giugno 2000, Valladolid, Spagna, ISBN. 84-8448-008-9.


[B23] E. Pezzuti, M.E. Biancolini, M. Postinghel, “Un método optimizado para la producción de equipos ortopédicos para las extremidades inferiores”, XII Congreso Internacional de Ingeniería Gráfica, Giugno 2000, Valladolid, Spagna, ISBN. 84-8448-008-9.


[B24] E. Pezzuti, E. Pennestrì, F. Pavone, M.M. Pierro, “Schienale dinamico a torsione adattabile per bambini ed adulti con grave distonia”, XIV Congresso S.I.B.O.T., 10-12 Maggio 2001, Bari, Italia – Vincitore del premio come miglior lavoro presentato


[B25] M. E. Biancolini, C. Brutti, E. Pezzuti, “Shape optimisation for structural design by means of Finite Elements Method”, 12th International Conference on Design Tools and Methods in Industrial Engineering”, Rimini - Italy on September 5-7 2001


[B26] E. Pezzuti, F. Pavone, E. Pennestrì, M.M. Pierro, F. Mattogno, “Progettazione CAD di una sedia per soggetti distonici”, 12th International Conference on Design Tools and Methods in Industrial Engineering”, Rimini - Italy on September 5-7 2001


[B27] E. Pezzuti, M. E. Biancolini, A. Ubertini, A. Gaspari, “Modelización CAD 3D del cuerpo humano y applicación para la análisis del movimiento”, XIV Congreso Internacional de Ingegneria Gràfica, Santander, 5-7 Junio 2002, Spagna


[B28] E. Pennestrì, E. Pezzuti, P.P. Valentini, “On formulas and Methods for expressing the attitude of a rigid body”, International Design Conference - Design 2002 Dubrovnik, May 14 - 17, 2002, ISBN-953-6313-46-4.


[B29] E. Pezzuti, L. Reccia, A. Ubertini, A. Gaspari, “Analisi dell’interazione pilota-kart mediante tecnica multibody”- AIAS 2002 – 31st National Conference of the Italian Association for Stress Analysis – 18-21 Sept., Parma, Italy


[B30] E. Pezzuti, A. Ubertini, P.P. Valentini, “A Methodology for teaching Computer Aided Design and Drawing: a didactical experience”, InternationalConference ISEC-02, Rome, September 23-26, 2003, Volume: System-based Vision for Strategic and Creative Design (pp. 2149-2153). ISBN/ISSN: 90-5809-599-1. ROMA: Franco Bontempi (ITALY), A.A. Balkema Publishers, Swets & Zellinger, Netherlands


[B31] E. Pezzuti, A. Ubertini, P.P. Valentini, “Una metodologia per l’analisi e l’archiviazione di reperti archeologici basata sul rilievo mediante scanner laser tridimensionali a non contatto”, IV Seminario Internazionale Italo-Spagnolo, 3.6.2003, Università degli Studi di Cassino


[B32] F. Londi, E. Pezzuti, P.P. Valentini, L. Vita, “Una metodologia di simulazione della cinematica e dinamica dei meccanismi a puleggia basata su tecniche di realtà virtuale in ambiente VRLM”, XIII ADM - XV Ingegraf International Conference, June 2003, Napoli, Italia


[B33] E. Pezzuti, L. Reccia, A. Ubertini, “L’impiego di modelli CAD del corpo umano in software tipo multibody nello studio dell’interazione kart-pilota”, XIII ADM - XV Ingegraf International Conference, June 2003, Napoli, Italia



[B34] E. Pezzuti, G. Piscopo, A. Ubertini, P.P. Valentini, L. Vita, “Cad modelling and virtual simulation of an aircraft door mechanism”, XVI Congreso Internacional de Ingeniería Gráfica, Zaragoza, Spagna, Giugno 2004


[B35] E. Pezzuti, G. Sola, A. Ubertini, P.P. Valentini, L. Vita, “Diseño y desarrollo de una máquina por medidas antropometricas”, XVI Congreso Internacional de Ingeniería Gráfica, Zaragoza, Spagna, Giugno 2004


[B36] E.Pezzuti,A. Ubertini, P.P. Valentini, L. Vita, “An Integrated methodology to improve the design of wings”, XVI Congreso Internacional de Ingeniería Gráfica, Zaragoza, Spagna, Giugno 2004


[B37] E.Pezzuti, G. Piscopo, A. Ubertini, P.P. Valentini, L. Vita, “Una metodologia per il rilievo, la catalogazione e la ricostruzione di reperti archeologici”, Convegno Nazionale XIV ADM – XXXIII AIAS “Innovazione nella Progettazione Industriale”, Politecnico di Bari - 31 Agosto - 2 Settembre 2004, ISBN:88-900637-3-4


[B38] E. Pezzuti, G. Piscopo, A. Ubertini, P.P. Valentini, L. Vita, “Analisi di meccanismi spaziali con tolleranze geometriche e dimensionali mediante un approccio basato sull’algebra duale”, Convegno Nazionale XIV ADM – XXXIII AIAS “Innovazione nella Progettazione Industriale”, Politecnico di Bari - 31 Agosto - 2 Settembre 2004, ISBN:88-900637-3-4


[B39] E. Pezzuti, G. Piscopo, A. Ubertini, P.P. Valentini, L. Vita, “Applicazione del metodo cinematico per la stima dell’effetto delle tolleranze sugli errori di posizione di un cinematismo di apertura di una porta”, Convegno Nazionale XIV ADM – XXXIII AIAS “Innovazione nella Progettazione Industriale”, Politecnico di Bari – 31 Agosto - 2 Settembre 2004, ISBN:88-900637-3-4


[B40] E. Pezzuti, G. Piscopo, A. Ubertini, P.P. Valentini, “Investigation on pin-hole connection in flexible assembly”, Atti del XVII congresso di Ingegneria Grafica INGEGRAF 2005, Siviglia, Spagna


[B41] E. Pezzuti, G. Piscopo, A. Ubertini, P.P. Valentini, “Tolerance allocation in flexible assemblies: a practical case”, Atti del XVII congresso di Ingegneria Grafica INGEGRAF 2005, Siviglia, Spagna


[B42] E. Pezzuti, P.P. Valentini, L. Vita, “Design and optimization of a wheelchair for basketball using cad”, XVII congresso di Ingegneria Grafica INGEGRAF 2006, SITGES, Barcellona, Spagna


[B43] E. Pezzuti, G. Piscopo, A. Ubertini, P.P. Valentini, “Shape optimization and tolerance analysis of dental implants by means of virtual models”, XVII congresso di Ingegneria Grafica INGEGRAF 2006, SITGES, Barcellona, Spagna


[B44] E. Pezzuti, D. Gattamelata, P.P. Valentini, “Using application programming interface to integrate reverse engineering methodologies into SolidWorks”, XVII congresso di Ingegneria Grafica INGEGRAF 2006, SITGES, Barcellona, Spagna


[B45] E. Pezzuti, R. di Leginio, G. Piscopo, A. Ubertini, P.P. Valentini, “Caratterizzazione delle prestazioni ed ottimizzazione di impianti dentali mediante tecniche CAD-FEM”, II Congresso Nazionale A.I.S.I., Roma, 4-6 Maggio 2006


[B46] E. Pezzuti, D. Gattamelata, P.P. Valentini, “Sensibilità agli errori di off-desing nella modellazione estetica di superfici”, Giornate di Studio ADM, Metodi di progettazione concettuale per l’innovazione, Forlì, 14-15 settembre 2006


[B47] Eugenio Pezzuti, Giampietro Piscopo, Alessio Umbertini, “Effects of surface errors in mechanical assemblies”, XVI Congresso ADM – XIX INGEGRAF, Perugia, 6-8, Giugno 2007, Italia, ISBN 978-884671832-7


[B48] Eugenio Pezzuti, Giampietro Piscopo, Pier Paolo Valentini, “Metodo di assegnazione delle tolleranze geometriche e dimensionali mediante ottimizzazione vincolata”, XVI Congresso ADM – XIX INGEGRAF, Perugia, 6-8, Giugno 2007, Italia, ISBN 978-884671832-7


[B49] Eugenio Pezzuti, Pier Paolo Valentini, “Tolerance allocation in automotive high-performance spatial cam systems”, XVI Congresso ADM – XIX INGEGRAF, Perugia, 6-8, Giugno 2007, Italia, ISBN 978-884671832-7


[B50] Davide Gattamelata, Eugenio Pezzuti, Pier Paolo Valentini, “Computer-aided simulation of human upper limb movement”, XVI Congresso ADM – XIX INGEGRAF, Perugia, 6-8, Giugno 2007, Italia, ISBN 978-884671832-7


[B51] Eugenio Pezzuti, Giampietro Piscopo,Pier Paolo Valentini, “Computer Aided Analysis of immediate loading dental implants”, Third Asian Pacific Conference on Biomechanics “AP Biomech 2007”, 5-8 November, Tokyo, Japan


[B52] P.P. Valentini, D. Gattamelata, E. Pezzuti “A CAD system in Augmented Reality application”, 20th European Modeling and Simulation Symposium EMSS 2008, Pages 112-118, 20th European Modeling and Simulation Symposium, EMSS 2008; Campora San Giovanni, Amantea, CS; Italy; 17 September 2008 through 19 September 2008; Code 94563. 2-s2.0-84871576565


[B53] P.P. Valentini, D. Gattamelata, E. Pezzuti, “Using augmented reality for interactive engineering simulation of motion”, Congresso Congiunto ADM-Ingegraf 2009, Lugo, Spagna, 10-12, Giugno 2009, ISBN 978-84-96351-57-8


[B54] P.P. Valentini, E. Pezzuti, D. Gattamelata, “Interactive multibody simulation in Augmented Reality”, Proc. of ECCOMAS Multibody Dynamics Congress, Warsaw, Poland, Giugno 2009.


[B55] P.P. Valentini, E. Pezzuti, “Dynamic Splines for interactive simulation of elastic beams in Augmented Reality”, IMProVe 2011, Proceedings of the IMProVe 2011. Venezia, 15-17 Giugno 2011, ISBN/ISSN: 978-88-7784-328-9. PADOVA: Libreria Cortina (ITALY).


[B56] P.P. Valentini, E. Pezzuti, “Design and interactive simulation of cross-axis compliant pivot using dynamic splines”,Paper presented at ADM - Virtual Concept International Congress, Island of Capri(NA), 19-21 Sept., 2012- Italy, Proceedings of ADM Workshop 2012, ISBN:8890209690



Research products

2108/341623 - 2023 - Cost effectiveness and feasibility considerations on the design of mini-UAVs for balloon takedown. Part 2: Aircraft design approach selection
Pezzuti, Eugenio - 01 - Articolo su rivista
paper: COGENT ENGINEERING (Abingdon, Oxfordshire, UK : Cogent OA, an imprint of Taylor & Francis, 2014-) pp. -1 - issn: 2331-1916 - wos: WOS:001064395100001 (1) - scopus: 2-s2.0-85170685661 (1)

2108/318337 - 2023 - Electric Hybrid Powertrain for Armored Vehicles
Pezzuti, Eugenio - 01 - Articolo su rivista
paper: ENERGIES (Basel : Molecular Diversity Preservation International) pp. - - issn: 1996-1073 - wos: WOS:000955978600001 (4) - scopus: 2-s2.0-85151452014 (5)

2108/310876 - 2022 - POWER SPEED REDUCTION UNITS FOR GENERAL AVIATION PART 8: CASING DESIGN FOR METAL DIRECT ADDITIVE MANUFACTURING
Pezzuti, Eugenio - 01 - Articolo su rivista
paper: JOURNAL OF ENGINEERING AND APPLIED SCIENCES ([Islamabad] : Asian Research Publishing Network) pp. 661-669 - issn: 1819-6608 - wos: (0) - scopus: 2-s2.0-85133138618 (1)

2108/310875 - 2022 - POWER PLANT RELIABILITY ISSUES AND WEAR MONITORING IN AIRCRAFT PISTON ENGINES. PART I: ENGINE WEAR AND TBO REAL-TIME EXTENSION
Pezzuti, Eugenio - 01 - Articolo su rivista
paper: JOURNAL OF ENGINEERING AND APPLIED SCIENCES ([Islamabad] : Asian Research Publishing Network) pp. 806-814 - issn: 1819-6608 - wos: (0) - scopus: 2-s2.0-85134406305 (0)

2108/274900 - 2020 - NEXT GENERATION MAIN BATTLE TANK. PART I: UPGRADING THE “PAN” TANKS
Pezzuti, Eugenio - 01 - Articolo su rivista
paper: JOURNAL OF ENGINEERING AND APPLIED SCIENCES ([Islamabad] : Asian Research Publishing Network) pp. 1297-1305 - issn: 1819-6608 - wos: (0) - scopus: 2-s2.0-85103125339 (0)

2108/253847 - 2020 - Next generation main battle tank. Part II: Converting old MBTS into unmanned MBTS (UMBT)
Pezzuti, Eugenio - 01 - Articolo su rivista
paper: JOURNAL OF ENGINEERING AND APPLIED SCIENCES ([Islamabad] : Asian Research Publishing Network) pp. 1582-1591 - issn: 1819-6608 - wos: (0) - scopus: 2-s2.0-85090328067 (0)

2108/242826 - 2020 - On the Energy Management of the New Formula 1 Powerplants
Pezzuti, Eugenio - 01 - Articolo su rivista
paper: TECNICA ITALIANA (-Trieste: Tecnica Italiana. -Trieste : Stab. Tip. Nazionale, 1936- . poi luogo: Cormons) pp. 95-102 - issn: 0040-1846 - wos: (0) - scopus: (0)

2108/211676 - 2019 - Study and optimization of advanced heat sinks for processors
Pezzuti, Eugenio - 01 - Articolo su rivista
paper: JOURNAL OF ENGINEERING AND APPLIED SCIENCES ([Islamabad] : Asian Research Publishing Network) pp. 1082-1088 - issn: 1819-6608 - wos: (0) - scopus: 2-s2.0-85063371522 (6)

2108/273761 - 2018 - Flow analysis of multiple injectors in high-power-density HSDI CR diesel engines
Pezzuti, Eugenio - 01 - Articolo su rivista
paper: DIFFUSION AND DEFECT DATA, SOLID STATE DATA. PART A, DEFECT AND DIFFUSION FORUM (Scitec Publications Limited:Trans Tech House, Hardstrasse 13, CH-4714 Aedermannsdorf Switzerland:Fax: 011 41 62 741058 distribuito da : TRANS TECH PUBLICATIONS LTD, BRANDRAIN 6, ZURICH-UETIKON, SWITZERLAND, CH-8707) pp. 1-13 - issn: 1012-0386 - wos: (0) - scopus: 2-s2.0-85063110260 (1)

2108/213136 - 2018 - The advantage of the “split” turbocharger in Formula 1 engines
Pezzuti, Eugenio - 01 - Articolo su rivista
paper: TECNICA ITALIANA (-Trieste: Tecnica Italiana. -Trieste : Stab. Tip. Nazionale, 1936- . poi luogo: Cormons) pp. 36-41 - issn: 0040-1846 - wos: (0) - scopus: (0)

2108/203245 - 2018 - An analytical solution for the determination of the loads acting on a semi-elliptical wing: The case of the Reggiane Re 2005 WWII fighter
Pezzuti, Eugenio - 01 - Articolo su rivista
paper: JOURNAL OF ENGINEERING AND APPLIED SCIENCES ([Islamabad] : Asian Research Publishing Network) pp. 4393-4400 - issn: 1819-6608 - wos: (0) - scopus: 2-s2.0-85051038646 (5)

2108/203241 - 2018 - The optimization of power generation in low-cost Massproduced wheeled wind turbines
Pezzuti, Eugenio - 01 - Articolo su rivista
paper: JOURNAL OF ENGINEERING AND APPLIED SCIENCES ([Islamabad] : Asian Research Publishing Network) pp. 4466-4474 - issn: 1819-6608 - wos: (0) - scopus: 2-s2.0-85051948190 (8)

2108/205235 - 2018 - Feasibility study of the installation of an additional "over lift" wing on the ch47 Chinook for cruise performance improvement through the lift-compound approach
Pezzuti, Eugenio - 01 - Articolo su rivista
paper: JOURNAL OF ENGINEERING AND APPLIED SCIENCES ([Islamabad] : Asian Research Publishing Network) pp. 8142-8149 - issn: 1819-6608 - wos: (0) - scopus: 2-s2.0-85055937639 (6)

2108/204117 - 2018 - Multi-objective optimization of the cooling system of a diesel helicopter
Pezzuti, Eugenio - 01 - Articolo su rivista
paper: JOURNAL OF ENGINEERING AND APPLIED SCIENCES ([Islamabad] : Asian Research Publishing Network) pp. 4610-4616 - issn: 1819-6608 - wos: (0) - scopus: 2-s2.0-85053151102 (10)

2108/204497 - 2018 - Intake and exhaust position optimization in the cooling duct of diesel helicopters
Pezzuti, Eugenio - 01 - Articolo su rivista
paper: JOURNAL OF ENGINEERING AND APPLIED SCIENCES ([Islamabad] : Asian Research Publishing Network) pp. 4811-4819 - issn: 1819-6608 - wos: (0) - scopus: 2-s2.0-85054270206 (10)

2108/208637 - 2018 - Feasibility study and preliminary design of a Ram-Pulsejet for hypersonic passenger Air Transport
Pezzuti, Eugenio - 01 - Articolo su rivista
paper: JOURNAL OF ENGINEERING AND APPLIED SCIENCES ([Islamabad] : Asian Research Publishing Network) pp. 8356-8365 - issn: 1819-6608 - wos: (0) - scopus: 2-s2.0-85055940070 (6)

2108/274902 - 2018 - Mobility improvement of heavy tracked vehicles: The "pan" tank experience
Pezzuti, Eugenio - 01 - Articolo su rivista
paper: JOURNAL OF ENGINEERING AND APPLIED SCIENCES ([Islamabad] : Asian Research Publishing Network) pp. 8937-8944 - issn: 1819-6608 - wos: (0) - scopus: 2-s2.0-85066064724 (1)

2108/274896 - 2018 - Dispositivo chiuso per la cottura di alimenti per conduzione, vapore e irraggiamento dotato di sistema per l’eliminazione di liquidi e grassi e per la riduzione della produzione di vapori all’esterno
Pezzuti, Eugenio - 06 - Brevetti e altre privative registrate

2108/274898 - 2018 - Pinza da demolizione di veicoli dotata di sistema di estrazione del gruppo motopropulsore
Pezzuti, Eugenio - 06 - Brevetti e altre privative registrate

2108/203243 - 2018 - The decisive advantage of CRDID on spark-ignition piston engines for general aviation: Propeller and engine matching for a specific aircraft
Pezzuti, Eugenio - 01 - Articolo su rivista
paper: JOURNAL OF ENGINEERING AND APPLIED SCIENCES ([Islamabad] : Asian Research Publishing Network) pp. 4244-4252 - issn: 1819-6608 - wos: (0) - scopus: 2-s2.0-85050128885 (8)

2108/204121 - 2018 - Optimized parachute recovery systems for remote piloted aerial systems
Pezzuti, Eugenio - 01 - Articolo su rivista
paper: JOURNAL OF ENGINEERING AND APPLIED SCIENCES ([Islamabad] : Asian Research Publishing Network) pp. 4590-4597 - issn: 1819-6608 - wos: (0) - scopus: 2-s2.0-85053142817 (6)

2108/183523 - 2017 - Accuracy in fingertip tracking using Leap Motion Controller for interactive virtual applications
Valentini, Pier Paolo; Pezzuti, Eugenio - 01 - Articolo su rivista
paper: INTERNATIONAL JOURNAL ON INTERACTIVE DESIGN AND MANUFACTURING (Springer) pp. 641-650 - issn: 1955-2513 - wos: WOS:000406971500017 (32) - scopus: 2-s2.0-84976863781 (47)

2108/155147 - 2016 - Computer-aided tolerance allocation of compliant ortho-planar spring mechanism
Valentini, Pier Paolo; Pezzuti, Eugenio - 01 - Articolo su rivista
paper: INTERNATIONAL JOURNAL OF COMPUTER APPLICATIONS IN TECHNOLOGY (Inderscience Enterprises Limited:29 route de Pre-Bois, CP 896, CH-1215 Geneva Switzerland:011 44 1234 713365, EMAIL: subs@inderscience.com, INTERNET: http://www.inderscience.com, Fax: 011 41 22 7910885) pp. 369-374 - issn: 0952-8091 - wos: WOS:000392839700008 (3) - scopus: 2-s2.0-84977630094 (20)

2108/191862 - 2016 - Oral implantology today: surgical protocol, historical facts, diagnostic imaging, biomechanical notes
Pezzuti, Eugenio - 01 - Articolo su rivista
paper: IMPLANTS (Leipzig : Oemus Media) pp. 44-53 - issn: 1868-3207 - wos: (0) - scopus: (0)

2108/116762 - 2015 - Aircraft diesel engine turbocompound optimized
Pezzuti, Eugenio - 01 - Articolo su rivista
paper: JP JOURNAL OF HEAT AND MASS TRANSFER (India: PUSHPA PUBLISHING HOUSE,) pp. 133-150 - issn: 0973-5763 - wos: (0) - scopus: 2-s2.0-84930713388 (17)

2108/101635 - 2014 - Car stability controlled by fuzzy algorithm
Pezzuti, Eugenio - 01 - Articolo su rivista
paper: JOURNAL OF ENGINEERING AND APPLIED SCIENCES ([Islamabad] : Asian Research Publishing Network) pp. 1621-1628 - issn: 1819-6608 - wos: (0) - scopus: 2-s2.0-84907260436 (0)

2108/85047 - 2014 - Aircraft diesel engines controlled by fuzzy logic
Pezzuti, Eugenio - 01 - Articolo su rivista
paper: JOURNAL OF ENGINEERING AND APPLIED SCIENCES ([Islamabad] : Asian Research Publishing Network) pp. 30-34 - issn: 1819-6608 - wos: (0) - scopus: 2-s2.0-84894387428 (54)

2108/101488 - 2014 - Kers applications to aerospace diesel propulsion
Pezzuti, Eugenio - 01 - Articolo su rivista
paper: JOURNAL OF ENGINEERING AND APPLIED SCIENCES ([Islamabad] : Asian Research Publishing Network) pp. 807-818 - issn: 1819-6608 - wos: (0) - scopus: 2-s2.0-84901191389 (59)

2108/93109 - 2014 - FEM analysis for critical components in engines systems
Pezzuti, Eugenio - 01 - Articolo su rivista
paper: JOURNAL OF ENGINEERING AND APPLIED SCIENCES ([Islamabad] : Asian Research Publishing Network) pp. 1672-1679 - issn: 1819-6608 - wos: (0) - scopus: 2-s2.0-84907272626 (0)

2108/100987 - 2014 - Structural composites for aircraft design
Pezzuti, Eugenio - 01 - Articolo su rivista
paper: JOURNAL OF ENGINEERING AND APPLIED SCIENCES ([Islamabad] : Asian Research Publishing Network) pp. 1889-1898 - issn: 1819-6608 - wos: (0) - scopus: 2-s2.0-84908400022 (1)

2108/101633 - 2014 - Development of a modular system for drilling aid for the installation of dental implants
Pezzuti, Eugenio; Valentini, Pier Paolo - 01 - Articolo su rivista
paper: JOURNAL OF ENGINEERING AND APPLIED SCIENCES ([Islamabad] : Asian Research Publishing Network) pp. 1527-1534 - issn: 1819-6608 - wos: (0) - scopus: 2-s2.0-84907272759 (15)

2108/93609 - 2013 - Design and interactive simulation of cross-axis compliant pivot using dynamic splines
Pezzuti, Eugenio; Valentini, Pier Paolo - 01 - Articolo su rivista
paper: INTERNATIONAL JOURNAL ON INTERACTIVE DESIGN AND MANUFACTURING (Springer) pp. 261-269 - issn: 1955-2513 - wos: (0) - scopus: 2-s2.0-84887607449 (30)

2108/102512 - 2012 - Design and interactive simulation of cross-axis compliant pivot using dynamic splines
Valentini, Pier Paolo; Pezzuti, Eugenio - 02 - Intervento a convegno
conference: ADM - Virtual Concept International Congress (Capri(NA) - Italy)

2108/74867 - 2012 - Methodology to evaluate aircraft piston engine durability
Pezzuti, Eugenio - 01 - Articolo su rivista
paper: INTERNATIONAL JOURNAL OF HEAT AND TECHNOLOGY (Edizioni Ets:Piazza Carrara 16-19, I 56126 Pisa Italy:011 39 050 29544, EMAIL: info@edizioniets.com, Fax: 011 39 050 20158) pp. 89-92 - issn: 0392-8764 - wos: (0) - scopus: 2-s2.0-84867145918 (51)

2108/137523 - 2012 - Method for evaluating the durability of aircraft piston engines
Pezzuti, Eugenio - 01 - Articolo su rivista
paper: WALAILAK JOURNAL OF SCIENCE AND TECHNOLOGY (Nakhon Si Thamarat : Institute of Research and Development, Walailak University) pp. 425-431 - issn: 1686-3933 - wos: (0) - scopus: 2-s2.0-84885621855 (58)

2108/71107 - 2012 - Fuzzy logic controlling motorbikes antiskid
Pezzuti, Eugenio - 01 - Articolo su rivista
paper: FAR EAST JOURNAL OF ELECTRONICS AND COMMUNICATIONS (Allahabad : Pushpa Publishing House) pp. 35-53 - issn: 0973-7006 - wos: (0) - scopus: ZentralblattfurMathematikdatabase (0)

2108/54640 - 2011 - Revised KAD Tool To Optimize F1 Cars Through A Combined-Elitarian Genetic-Fuzzy Algorithm
Pezzuti, Eugenio - 01 - Articolo su rivista
paper: MAGALLAT GAMI AT AL-MALIK SAUD. AL-ʹULUM AL-HANDSIYYAT (Al-Riyāḍ: Ǧāmiʹaẗ al-malik Saʹūd.) pp. - - issn: 1018-3639 - wos: (0) - scopus: 2-s2.0-84929305317 (2)

2108/51231 - 2011 - Effects of geometrical and dimensional errors on kinematics and dynamics of Tracta coupling
Pezzuti, Eugenio; Valentini, Pier Paolo - 01 - Articolo su rivista
paper: JOURNAL OF THEORETICAL AND APPLIED MECHANICS () pp. - - issn: 1429-2955 - wos: WOS:000287468100008 (4) - scopus: 2-s2.0-79551595796 (5)

2108/22966 - 2011 - Dynamic splines for interactive simulation of elastic beams in augmented reality
Valentini, Pier Paolo; Pezzuti, Eugenio - 02 - Intervento a convegno
conference: IMProVe 2011: International conference on innovative methods in product design (Venezia)
book: Proceedings of IMPROVE 2011 - (978-88-7784-328-9)

2108/70688 - 2011 - Fuzzy control system for recovering direction after spinning
Pezzuti, Eugenio - 01 - Articolo su rivista
paper: INTERNATIONAL JOURNAL OF HEAT AND TECHNOLOGY (Edizioni Ets:Piazza Carrara 16-19, I 56126 Pisa Italy:011 39 050 29544, EMAIL: info@edizioniets.com, Fax: 011 39 050 20158) pp. 87-93 - issn: 0392-8764 - wos: (0) - scopus: 2-s2.0-84856376509 (52)

2108/22963 - 2011 - Effects of geometrical and dimensional errors on kinematics and dynamics of tracta coupling
Valentini, Pier Paolo; Pezzuti, Eugenio - 01 - Articolo su rivista
paper: JOURNAL OF THEORETICAL AND APPLIED MECHANICS () pp. 117-133 - issn: 1429-2955 - wos: WOS:000287468100008 (4) - scopus: 2-s2.0-79551595796 (5)

2108/70687 - 2011 - Active antiskid system for handling improvement in motorbikes controlled by fuzzy logic
Pezzuti, Eugenio - 01 - Articolo su rivista
paper: INTERNATIONAL JOURNAL OF HEAT AND TECHNOLOGY (Edizioni Ets:Piazza Carrara 16-19, I 56126 Pisa Italy:011 39 050 29544, EMAIL: info@edizioniets.com, Fax: 011 39 050 20158) pp. 95-101 - issn: 0392-8764 - wos: (0) - scopus: 2-s2.0-84856385420 (46)

2108/12573 - 2010 - Interactive multibody simulation in augmented reality
Valentini, Pier Paolo; Pezzuti, Eugenio - 01 - Articolo su rivista
paper: JOURNAL OF THEORETICAL AND APPLIED MECHANICS () pp. 733-750 - issn: 1429-2955 - wos: (0) - scopus: http://www.scopus.com/inward/record.url?eid=2-s2.0-77955694882&partnerID=40&md5=25d48c9d98db0dfc4c23be13267d9a31 (0)

2108/13883 - 2010 - Virtual engineering in augmented reality
Valentini, Pier Paolo; Pezzuti, Eugenio - 03 - Contributo in libro
book: Computer animation - (978-1-60741-559-6)

2108/310878 - 2010 - Microstructural and mechanical characteristics of welded joints in type 6082-T6 aluminium alloy
Missori, Severino; Pezzuti, Eugenio - 01 - Articolo su rivista
paper: WELDING INTERNATIONAL (Berlin New York: Springer, Part of Springer Science+Business Media Cambridge : Welding Institute, 1987- Cambridge; United Kingdom: Woodhead Publishing) pp. 468-474 - issn: 0950-7116 - wos: (0) - scopus: 2-s2.0-85011141915 (9)

2108/35832 - 2010 - Virtual engineering in augmented reality reality
Pezzuti, Eugenio; Valentini, Pier Paolo - 03 - Contributo in libro
book: Computer Animation - (978-1-60741-669-6)

2108/35835 - 2009 - Personalizzazione dei programmi CAD attraverso le interfacce di programmazione
Pezzuti, Eugenio - 01 - Articolo su rivista
paper: IL PROGETTISTA INDUSTRIALE (Milano: Tecniche Nuove.) pp. 24-26 - issn: 0392-4823 - wos: (0) - scopus: (0)

2108/13896 - 2009 - Using augmented reality for interactive engineering simulations of motion
Valentini, Pier Paolo; Pezzuti, Eugenio - 02 - Intervento a convegno
conference: 21. INGEGRAF - 17. ADM Joint international congress ()

2108/14322 - 2009 - Interactive multibody simulation in augmented reality
Valentini, Pier Paolo; Pezzuti, Eugenio - 02 - Intervento a convegno
conference: ECCOMAS Multibody dynamics congress ()
book: Proceedings of ECCOMAS Multibody dynamics congress - ()

2108/42068 - 2009 - Aspetti biomeccanici nell'interazione impianto-osso e quadri radiologici correlati
Pezzuti, Eugenio - 03 - Contributo in libro
book: Diagnostica per immagini in implantologia orale - (978-88-7141-832-2)

2108/42071 - 2009 - Using augmented reality for interactive engineering simulation of motion
Pezzuti, Eugenio; Valentini, Pier Paolo - 02 - Intervento a convegno
conference: ADM -INGEGRAF International Conference 2009 (LUGO, SPAGNA)
book: caminando desde la idea hacia las alternativas del diseño - (978-84-96351-57-8)

2108/14283 - 2008 - A CAD system in augmented reality application
Valentini, Pier Paolo; Pezzuti, Eugenio - 02 - Intervento a convegno
conference: European modeling and simulation symposium ()

2108/14246 - 2008 - Three-dimensional finite-element analysis of immediate loading dental implants
Valentini, Pier Paolo; Pezzuti, Eugenio - 01 - Articolo su rivista
paper: JOURNAL OF BIOMECHANICAL SCIENCE AND ENGINEERING (Tokyo : Japan Society of Mechanical Engineers.) pp. 312-323 - issn: 1880-9863 - wos: (0) - scopus: (0)

2108/14281 - 2008 - L’impatto dell’evoluzione dei sistemi CAD nella didattica del disegno di macchine
Valentini, Pier Paolo; Pezzuti, Eugenio - 03 - Contributo in libro
book: Rappresentazione e formazione: tra ricerca e didattica - (978-88-548-1633-6)

2108/47168 - 2008 - Dimensional and geometrical tolerance synthesis based on constrained optimisation: An industrial case
Pezzuti, Eugenio - 01 - Articolo su rivista
paper: INTERNATIONAL JOURNAL OF COMPUTER APPLICATIONS IN TECHNOLOGY (Inderscience Enterprises Limited:29 route de Pre-Bois, CP 896, CH-1215 Geneva Switzerland:011 44 1234 713365, EMAIL: subs@inderscience.com, INTERNET: http://www.inderscience.com, Fax: 011 41 22 7910885) pp. 33-40 - issn: 0952-8091 - wos: (0) - scopus: 2-s2.0-57349191040 (3)

2108/35834 - 2008 - Lesioni post – implantari indirette del nervo alveolare inferiore. Aspetti radiologici e biomeccanici
Pezzuti, Eugenio - 01 - Articolo su rivista
paper: ORAL & IMPLANTOLOGY (Roma : CIC Edizioni Internazionali) pp. 79-83 - issn: 1974-5648 - wos: (0) - scopus: (0)

2108/35831 - 2008 - Dimensional and geometrical tolerance synthesis based on constrained optimization: an industrial case
Pezzuti, Eugenio - 01 - Articolo su rivista
paper: INTERNATIONAL JOURNAL OF COMPUTER APPLICATIONS IN TECHNOLOGY (Inderscience Enterprises Limited:29 route de Pre-Bois, CP 896, CH-1215 Geneva Switzerland:011 44 1234 713365, EMAIL: subs@inderscience.com, INTERNET: http://www.inderscience.com, Fax: 011 41 22 7910885) pp. 33-40 - issn: 0952-8091 - wos: (0) - scopus: 2-s2.0-57349191040 (3)

2108/35836 - 2008 - Lesioni post-implantari indirette del nervo alveolare inferiore. spetti radiologici e biomeccanici
Pezzuti, Eugenio - 01 - Articolo su rivista
paper: ORAL & IMPLANTOLOGY (Roma : CIC Edizioni Internazionali) pp. 79-83 - issn: 1974-5648 - wos: (0) - scopus: (0)

2108/35837 - 2008 - L’impatto dell’evoluzione dei sistemi CAD nella didattica del Disegno di Macchine
Valentini, Pier Paolo; Pezzuti, Eugenio - 03 - Contributo in libro
book: Collana di studi e ricerche sul Disegno dell’Architettura e dell’Ambiente - (978-88-548-1633-6)

2108/14279 - 2008 - La rugosità: i parametri, le misure e l’influenza nella progettazione
Valentini, Pier Paolo; Pezzuti, Eugenio - 03 - Contributo in libro
book: Disegno tecnico industriale - (978-88-426-7008-7)

2108/52147 - 2008 - A CAD system in Augmented Reality application
Pezzuti, Eugenio; Valentini, Pier Paolo - 02 - Intervento a convegno
conference: 20th European Modeling and Simulation Symposium, track on Virtual Reality and Visualization (BRIATICO (CS), ITALIA)

2108/35838 - 2007 - Correlazioni biomeccaniche-radiologiche nel riassorbimento osseo perimplantare. Studio comparativo su 47 soggetti
Pezzuti, Eugenio - 01 - Articolo su rivista
paper: DOCTOR. OS (-Milano: Ariesdue -Milano: Ariete Edizioni) pp. 117-123 - issn: 1120-7140 - wos: (0) - scopus: (0)

2108/52146 - 2007 - Tolerance allocation in automotive high-performance spatial cam systems
Pezzuti, Eugenio; Valentini, Valentino - 02 - Intervento a convegno
conference: XVI Congresso ADM – XIX INGEGRAF (PERUGIA, ITALIA)

2108/47317 - 2007 - Effects of 3D surface errors in mechanical assemblies
Pezzuti, Eugenio - 02 - Intervento a convegno
conference: XVI Congresso ADM – XIX INGEGRAF (PERUGIA, ITALIA)

2108/52148 - 2007 - Computer-aided simulation of human upper limb movement
Pezzuti, Eugenio; Valentini, Pier Paolo - 02 - Intervento a convegno
conference: XVI Congresso ADM – XIX INGEGRAF (PERUGIA, ITALIA)

2108/52149 - 2007 - Computer Aided Analysis of immediate loading dental implants
Pezzuti, Eugenio; Valentini, Pier Paolo - 02 - Intervento a convegno
conference: Third Asian Pacific Conference on Biomechanics “AP Biomech 2007" (TOKYO, JP)

2108/15646 - 2007 - Tolerance allocation automotive high-performance spatial cam systems
Pezzuti, Eugenio; Valentini, Pier Paolo - 02 - Intervento a convegno
conference: Congresso internazionale congiunto 16. ADM – 19. Ingegraf ()
book: Dall'idea al prodotto: la rappresentazione come base per lo sviluppo e l'innovazione - (978-884671841-9)

2108/34640 - 2007 - Accurate geometrical constraints for the computer aided modeling of the human upper limb
Pezzuti, Eugenio; Valentini, Pier Paolo - 01 - Articolo su rivista
paper: Computer Aided Design Report () pp. 540-546 - issn: 0276-749X - wos: (0) - scopus: 2-s2.0-34249890780 (13)

2108/18873 - 2007 - Computer-aided simulation of human upper limb movements
Pezzuti, Eugenio; Valentini, Pier Paolo - 02 - Intervento a convegno
conference: Congresso internazionale congiunto 16. ADM – 19. Ingegraf (Perugia)
book: Atti del Congresso internazionale congiunto 16. ADM – 19. INGEGRAF, Perugia, 6th-8th June 2007 [cd-rom] - (978-884671832-7)

2108/18885 - 2007 - Three-dimensional finite-element analysis of immediate loading dental implants
Valentini, Pier Paolo; Pezzuti, Eugenio - 02 - Intervento a convegno
conference: Asian Pacific conference on biomechanics (Tokyo)

2108/47290 - 2007 - Accurate geometrical constraints for the computer aided modelling of the human upper limb
Pezzuti, Eugenio; Valentini, Pier Paolo - 01 - Articolo su rivista
paper: COMPUTER AIDED DESIGN (Butterworth Heinemann Publishers:Linacre House Jordan Hill, Oxford OX2 8DP United Kingdom:011 44 1865 314569, EMAIL: bhmarketing@repp.co.uk, INTERNET: http://www.laxtonsprices.co.uk, Fax: 011 44 1865 314569) pp. 540-547 - issn: 0010-4485 - wos: WOS:000248075800002 (10) - scopus: 2-s2.0-34249890780 (13)

2108/15645 - 2007 - Metodo di assegnazione delle tolleranze geometriche e dimensionali mediante ottimizzazione vincolata
Pezzuti, Eugenio; Valentini, Pier Paolo - 02 - Intervento a convegno
conference: Congresso internazionale congiunto 16. ADM – 19. Ingegraf ()
book: Dall'idea al prodotto: la rappresentazione come base per lo sviluppo e l'innovazione - (978-884671841-9)

2108/47318 - 2007 - Success rates in subjects rehabilitated with immediate loading technique on according to AISI guidelines
Pezzuti, Eugenio - 01 - Articolo su rivista
paper: ANNALI DI STOMATOLOGIA (Roma : CIC Edizioni Internazionali) pp. 19-23 - issn: 1824-0852 - wos: (0) - scopus: (0)

2108/52151 - 2006 - Shape optimization and tolerance analysis of dental implants by means of virtual models
Pezzuti, Eugenio; Valentini, Pier Paolo - 02 - Intervento a convegno
conference: XVII congresso di Ingegneria Grafica INGEGRAF 2006 (SITGES, SPAGNA)

2108/47328 - 2006 - Computer aided reconstruction of italian ancient clocks
Pennestri', Ettore; Pezzuti, Eugenio; Valentini, Pier Paolo - 01 - Articolo su rivista
paper: COMPUTER ANIMATION AND VIRTUAL WORLDS (John Wiley & Sons) pp. 565-572 - issn: 1546-4261 - wos: (0) - scopus: http://www.scopus.com/inward/record.url?eid=2-s2.0-33751505296&partnerID=40&md5=7b57f740e2bdaf1e54f3d878ce8d6694 (0)

2108/47332 - 2006 - Shape optimization and tolerance analysis of dental implants by means of virtual models
Pezzuti, Eugenio; Valentini, Pier Paolo - 02 - Intervento a convegno
conference: XVIII Congresso INGEGRAF ()

2108/35839 - 2006 - Computer-aided simulation and testing of spatial linkages with joint mechanical errors
Pezzuti, Eugenio; Valentini, Pier Paolo - 01 - Articolo su rivista
paper: INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (John Wiley & Sons Limited:1 Oldlands Way, Bognor Regis, P022 9SA United Kingdom:011 44 1243 779777, EMAIL: cs-journals@wiley.co.uk, INTERNET: http://www.wiley.co.uk, Fax: 011 44 1243 843232) pp. 1735-1748 - issn: 0029-5981 - wos: WOS:000235901200001 (15) - scopus: 2-s2.0-33644823029 (19)

2108/47324 - 2006 - Computer-aided virtual reconstruction of Italian ancient clocks
Pennestri', Ettore; Pezzuti, Eugenio; Valentini, Pier Paolo - 01 - Articolo su rivista
paper: COMPUTER ANIMATION AND VIRTUAL WORLDS (John Wiley & Sons) pp. 565-572 - issn: 1546-4261 - wos: WOS:000242481700006 (3) - scopus: 2-s2.0-33751505296 (5)

2108/47330 - 2006 - Sensibilità agli errori di off-design nella modellazione estetica di superfici
Pezzuti, Eugenio; Valentini, Pier Paolo - 02 - Intervento a convegno
conference: Giornate di studio ADM su “Metodi di Progettazione Concettuale per l’Innovazione” ()

2108/47334 - 2006 - Using Application programming interface to integrate reverse engineering methodologies into solidworks
Pezzuti, Eugenio; Valentini, Pier Paolo - 02 - Intervento a convegno
conference: XVIII Congresso INGEGRAF ()

2108/47331 - 2006 - Design and Optimization of a Wheelchair for Basketball using CAD
Pezzuti, Eugenio; Valentini, Pier Paolo - 02 - Intervento a convegno
conference: XVIII Congresso INGEGRAF ()

2108/52154 - 2006 - Caratterizzazione delle prestazioni ed ottimizzazione di impianti dentali mediante tecniche CAD-FEM
Pezzuti, Eugenio; Valentini, Pier Paolo - 02 - Intervento a convegno
conference: II Congresso Nazionale A.I.S.I (ROMA)

2108/52155 - 2006 - Sensibilità agli errori di off-desing nella modellazione estetica di superfici
Pezzuti, Eugenio; Valentini, Pier Paolo - 02 - Intervento a convegno
conference: Giornate di Studio ADM, Metodi di progettazione concettuale per l’innovazione (FORLI')

2108/52150 - 2006 - Design and optimization of a wheelchair for basketball using
Pezzuti, Eugenio; Valentini, Pier Paolo - 02 - Intervento a convegno
conference: XVII congresso di Ingegneria Grafica INGEGRAF 2006 (SITGES, SPAGNA)

2108/52153 - 2006 - Using application programming interface to integrate reverse engineering methodologies into SolidWorks
Pezzuti, Eugenio; Valentini, Pier Paolo - 02 - Intervento a convegno
conference: XVII congresso di Ingegneria Grafica INGEGRAF 2006 (SITGES, SPAGNA)

2108/310877 - 2006 - Computer-aided virtual reconstruction of Italian ancient clocks
Pennestri', Ettore; Pezzuti, Eugenio; Valentini, Pier Paolo; Vita, Leonardo - 01 - Articolo su rivista
paper: COMPUTER ANIMATION AND VIRTUAL WORLDS (John Wiley & Sons) pp. 565-572 - issn: 1546-4261 - wos: WOS:000242481700006 (3) - scopus: 2-s2.0-33751505296 (5)

2108/52143 - 2006 - Alterazioni radiologiche del canale mandibolare e aspetti biomeccanici correlati
Pezzuti, Eugenio - 01 - Articolo su rivista
paper: Bollettino della scuola medica ospedaliera () pp. - - issn: - wos: (0) - scopus: (0)

2108/52139 - 2005 - An integrated tool for design, shape modelling and performance analysis of 3D CAM
Pezzuti, Eugenio - 01 - Articolo su rivista
paper: INTERNATIONAL JOURNAL OF COMPUTER APPLICATIONS IN TECHNOLOGY (Inderscience Enterprises Limited:29 route de Pre-Bois, CP 896, CH-1215 Geneva Switzerland:011 44 1234 713365, EMAIL: subs@inderscience.com, INTERNET: http://www.inderscience.com, Fax: 011 41 22 7910885) pp. 185-191 - issn: 0952-8091 - wos: (0) - scopus: 2-s2.0-15844371948 (3)

2108/46727 - 2005 - An integrated tool for design, shape modelling and performance analysis of 3D cam
Pezzuti, Eugenio; Valentini, Pier Paolo - 01 - Articolo su rivista
paper: INTERNATIONAL JOURNAL OF COMPUTER APPLICATIONS IN TECHNOLOGY (Inderscience Enterprises Limited:29 route de Pre-Bois, CP 896, CH-1215 Geneva Switzerland:011 44 1234 713365, EMAIL: subs@inderscience.com, INTERNET: http://www.inderscience.com, Fax: 011 41 22 7910885) pp. 185-191 - issn: 0952-8091 - wos: (0) - scopus: 2-s2.0-15844371948 (3)

2108/46736 - 2005 - An integrated tool for design, shape modelling and performance analysis of 3d Cam
Valentini, Pier Paolo; Pezzuti, Eugenio - 01 - Articolo su rivista
paper: INTERNATIONAL JOURNAL OF COMPUTER APPLICATIONS IN TECHNOLOGY (Inderscience Enterprises Limited:29 route de Pre-Bois, CP 896, CH-1215 Geneva Switzerland:011 44 1234 713365, EMAIL: subs@inderscience.com, INTERNET: http://www.inderscience.com, Fax: 011 41 22 7910885) pp. 185-191 - issn: 0952-8091 - wos: (0) - scopus: http://www.scopus.com/inward/record.url?eid=2-s2.0-15844371948&partnerID=40&md5=c66ec2a824c2e31d5883451e4d7babba (0)

2108/51189 - 2005 - Tolerance allocation in flexible assemblies: a practical case
Valentini, Pier Paolo; Pezzuti, Eugenio - 02 - Intervento a convegno
conference: XVII congresso di Ingegneria Grafica INGEGRAF 2005 ()

2108/51188 - 2005 - Investigation on pin-hole connection in flexible assembly
Valentini, Pier Paolo; Pezzuti, Eugenio - 02 - Intervento a convegno
conference: XVII congresso di Ingegneria Grafica INGEGRAF 2005 ()

2108/52142 - 2005 - L’IMPLANTOLOGIA ORALE OGGI: PROTOCOLLI CHIRURGICI, CENNI STORICI, DIAGNOSTICA PER IMMAGINI E NOTE DI BIOMECCANICA
Pezzuti, Eugenio - 01 - Articolo su rivista
paper: Bollettino della scuola medica ospedaliera () pp. - - issn: - wos: (0) - scopus: (0)

2108/52157 - 2005 - Tolerance allocation in flexible assemblies: a practical case
Pezzuti, Eugenio; Valentini, Pier Paolo - 02 - Intervento a convegno
conference: XVII congresso di Ingegneria Grafica INGEGRAF 2005 (SIVIGLIA, SPAGNA)

2108/52141 - 2005 - Investigation on pin-hole connection in flexible assembly
Pezzuti, Eugenio; Valentini, Pier Paolo - 02 - Intervento a convegno
conference: XVII congresso di Ingegneria Grafica INGEGRAF 2005 (SIVIGLIA, SPAGNA)

2108/49755 - 2004 - Cad Modelling And Virtual Simulation Of An Aircraft Door Mechanism
Valentini, Pier Paolo; Pezzuti, Eugenio - 02 - Intervento a convegno
conference: XVI congresso di Ingegneria Grafica INGEGRAF 2004 ()

2108/52158 - 2004 - Cad Modelling and virtual simulation of an aircraft door mechanism
Pezzuti, Eugenio; Valentini, Pier Paolo - 02 - Intervento a convegno
conference: XVI Congreso Internacional de Ingeniería Gráfica (SARAGOZA, SPAGNA)

2108/52159 - 2004 - Una metodologia per il rilievo, la catalogazione e la ricostruzione di reperti archeologici
Pezzuti, Eugenio; Valentini, Pier Paolo - 02 - Intervento a convegno
conference: Convegno Nazionale XIV ADM – XXXIII AIAS “Innovazione nella Progettazione Industriale” (BARI, ITALIA)

2108/49473 - 2004 - Una metodologia per l’analisi e l’archiviazione di reperti archeologici basata sul rilievo mediante scanner laser tridimensionali a non-contatto
Valentini, Pier Paolo; Pezzuti, Eugenio - 03 - Contributo in libro
book: Archiviazione e restauro di reperti archeologici mediante tecniche CAD-RP - (88-900081-7-2)

2108/51195 - 2004 - Una metodologia per il rilievo, la catalogazione e la ricostruzione di reperti archeologici
Valentini, Pier Paolo; Pezzuti, Eugenio - 02 - Intervento a convegno
conference: Congresso ADM-AIAS 2004 ()

2108/51185 - 2004 - Applicazione del metodo cinematico per la stima dell’effetto delle tolleranze sugli errori di posizione di un cinematismo di apertura di una porta
Valentini, Pier Paolo; Pezzuti, Eugenio - 02 - Intervento a convegno
conference: Congresso ADM-AIAS 2004 ()

2108/52164 - 2004 - Analisi di meccanismi spaziali con tolleranze geometriche e dimensionali mediante un approccio basato sull’algebra duale
Pezzuti, Eugenio; Valentini, Pier Paolo - 02 - Intervento a convegno
conference: Convegno Nazionale XIV ADM – XXXIII AIAS “Innovazione nella Progettazione Industriale” (BARI, ITALIA)

2108/52167 - 2004 - Applicazione del metodo cinematico per la stima dell’effetto delle tolleranze sugli errori di posizione di un cinematismo di apertura di una porta
Pezzuti, Eugenio; Valentini, Pier Paolo - 02 - Intervento a convegno
conference: Convegno Nazionale XIV ADM – XXXIII AIAS “Innovazione nella Progettazione Industriale (BARI, ITALIA)

2108/51168 - 2004 - Disegño y Desarrollo de una Máquina por Medidas Antropometricas
Valentini, Pier Paolo; Pezzuti, Eugenio - 02 - Intervento a convegno
conference: XVI congresso di Ingegneria Grafica INGEGRAF 2004 ()

2108/51194 - 2004 - Analisi di meccanismi spaziali con tolleranze geometriche e dimensionali mediante un approccio basato sull’algebra duale
Valentini, Pier Paolo; Pezzuti, Eugenio - 02 - Intervento a convegno
conference: Congresso ADM-AIAS 2004 ()

2108/52163 - 2004 - An Integrated methodology to improve the design of wings
Pezzuti, Eugenio; Valentini, Pier Paolo - 02 - Intervento a convegno
conference: XVI Congreso Internacional de Ingeniería Gráfica (SARAGOZA, SPAGNA)

2108/51173 - 2004 - An Integrated Methodology To Improve The Design Of Wings
Valentini, Pier Paolo; Pezzuti, Eugenio - 02 - Intervento a convegno
conference: XVI congresso di Ingegneria Grafica INGEGRAF 2004 ()

2108/52161 - 2004 - Diseño y desarrollo de una máquina por medidas antropometricas
Pezzuti, Eugenio; Valentini, Pier Paolo - 02 - Intervento a convegno
conference: XVI Congreso Internacional de Ingeniería Gráfica (SARAGOZA, SPAGNA)

2108/52176 - 2003 - A Methodology for teaching Computer Aided Design and Drawing: a didactical experience
Pezzuti, Eugenio; Valentini, Pier Paolo - 02 - Intervento a convegno
conference: International Conference ISEC-02 (ROMA)

2108/52174 - 2003 - A methodology for teaching "Computer Aided Design and Drawing": a didactical experience
Pezzuti, Eugenio; Valentini, Pier Paolo - 02 - Intervento a convegno
conference: International Conference ISEC-02 (ROME, ITALY)
book: SYSTEM-BASED VISION FOR STRATEGIC AND CREATIVE DESIGN, VOLS 1-3 - (90-5809-599-1)

2108/52127 - 2002 - Analisi dell’interazione pilota-kart mediante tecnica multibody
Pezzuti, Eugenio; Gaspari, Achille - 02 - Intervento a convegno
conference: AIAS 2002 (PARMA)

2108/52170 - 2002 - Modelización CAD 3D del cuerpo humano y applicación para la análisis del movimiento
Pezzuti, Eugenio; Gaspari, Achille; Biancolini, Marco Evangelos - 02 - Intervento a convegno
conference: XIV Congreso Internacional de Ingegneria Gràfica (SANTANDER, SPAGNA)

2108/52132 - 2002 - On formulas and Methods for expressing the attidude of a rigid body
Pezzuti, Eugenio; Valentini, Pier Paolo - 02 - Intervento a convegno
conference: Design 2002 (Dubrovnik, CROATIA)

2108/50629 - 2001 - Schienale dinamico a torsione adattabile per bambini ed adulti con grave distonia
Pezzuti, Eugenio; Pennestri', Ettore - 02 - Intervento a convegno
conference: Congresso S.I.B.O.T., (Bari, Italia)

2108/52126 - 2001 - Shape optimisation for structural design by means of Finite Elements Method
Pezzuti, Eugenio; Biancolini, Marco Evangelos; Brutti, Carlo - 02 - Intervento a convegno
conference: 12th International Conference on Design Tools and Methods in Industrial Engineering (Rimini - Italy)

2108/52114 - 2001 - Progettazione CAD di una sedia per soggetti distonici
Pezzuti, Eugenio; Pennestri', Ettore - 02 - Intervento a convegno
conference: XIV Congresso S.I.B.O.T. (BARI, ITALIA)

2108/52112 - 2000 - Diseño CAD de una máquina de geometría variable para el moldeado de sistemas de postura",
Pezzuti, Eugenio; Pennestri', Ettore - 02 - Intervento a convegno
conference: XII Congreso Internacional de Ingeniería Gráfic (Valladolid, Spagna)

2108/52111 - 2000 - Un método optimizado para la producción de equipos ortopédicos para las extremidades inferiores
Pezzuti, Eugenio; Biancolini, Marco Evangelos - 02 - Intervento a convegno
conference: XII Congreso Internacional de Ingeniería Gráfica (Valladolid, Spagna)

2108/52108 - 1999 - ProMEC: un programma interattivo per l’analisi e la sintesi di meccanismi articolati piani
Pezzuti, Eugenio; Missori, Severino; Pennestri', Ettore - 03 - Contributo in libro
book: Progettazione e fattibilità dei prodotti industriali, Diseno y fabricabilidad de los productos industriales - (88-900081-3-X)

2108/52105 - 1999 - Numerical analysis of the effects of shape errors on squeeze lubrication in traditional hip joint prosthesis
Pezzuti, Eugenio; Biancolini, Marco Evangelos - 02 - Intervento a convegno
conference: II Congreso Iberoamericano de Expresion Grafica (SALTA, ARGENTINA)

2108/52107 - 1999 - A virtual device for testing sunglasses
Pezzuti, Eugenio; Biancolini, Marco Evangelos - 02 - Intervento a convegno
conference: XI Congresso Internazionale di Ingegneria Grafica (Pamplona-Logroño, Spain)

2108/52125 - 1999 - Valutazione della rugosità e degli errori di forma nelle protesi d’anca tradizionali e loro effetti sulle condizioni di lubrificazione
Pezzuti, Eugenio; Biancolini, Marco Evangelos - 02 - Intervento a convegno
conference: XI Congresso Internazionale ADM (PALERMO)

2108/52106 - 1999 - Wearing evaluation of turning tools by digital image processing
Pezzuti, Eugenio; Pennestri', Ettore - 02 - Intervento a convegno
conference: II Congreso Iberoamericano de Expresion Grafica (Salta, Argentina)

2108/52103 - 1998 - Analisi Tribologica di una Protesi d’anca
Pezzuti, Eugenio; Brutti, Carlo; Cappellini, Germana - 01 - Articolo su rivista
paper: RIVISTA DI PATOLOGIA DELL'APPARATO LOCOMOTORE (Roma : Nuova editrice grafica Napoli : Idelson) pp. 1-13 - issn: 0394-0772 - wos: (0) - scopus: (0)

2108/52101 - 1997 - Microstuctural and mechanical characteristics of welded joints in type 6082-T6 aluminium alloy
Pezzuti, Eugenio; Missori, Severino - 01 - Articolo su rivista
paper: WELDING INTERNATIONAL (Berlin New York: Springer, Part of Springer Science+Business Media Cambridge : Welding Institute, 1987- Cambridge; United Kingdom: Woodhead Publishing) pp. 468-474 - issn: 0950-7116 - wos: (0) - scopus: (0)

2108/52099 - 1996 - Una procedura automatizzata per il calcolo di ingranaggi per alberi paralleli con più ruote in presa secondo la normativa UNI-8862
Pezzuti, Eugenio - 01 - Articolo su rivista
paper: ORGANI DI TRASMISSIONE (Tecniche Nuove SPA:via Eritrea 21, I 20157 Milan Italy:011 39 02 39090241, INTERNET: http://www.tecnichenuove.com, Fax: 011 39 02 39090335) pp. - - issn: 0030-4905 - wos: (0) - scopus: (0)

2108/52100 - 1996 - Caratterizzazione meccanica ed analisi microstrutturale di una lega di alluminio tipo 6082
Pezzuti, Eugenio; Missori, Severino - 01 - Articolo su rivista
paper: RIVISTA ITALIANA DELLA SALDATURA (Istituto Italiano Della Saldatura =:L Go Bisagno Istria 15 A Nero, 16141 Genova Italy:011 39 010 8341366, EMAIL: deborah.testoni@iis.it, INTERNET: http://www.iis.it, Fax: 011 39 010 867780) pp. - - issn: 0035-6794 - wos: (0) - scopus: (0)

2108/52098 - 1994 - La formazione di cricche nei dischi freno ferroviari. Analisi elastoplastica delle tensioni dovute ai transitori termici
Pezzuti, Eugenio - 01 - Articolo su rivista
paper: ISTRUZIONE TECNICA E PROFESSIONALE (Organizzazione RAB SRL:via Crocifisso 51, 00165 Rome Italy:011 39 6 632595, 011 39 6 6381177) pp. - - issn: 0535-899X - wos: (0) - scopus: (0)

2108/52097 - 1994 - Analisi delle tensioni nei serbatoi cilindrici interrati per lo stoccaggio in pressione di liquidi pericolosi
Pezzuti, Eugenio - 01 - Articolo su rivista
paper: ISTRUZIONE TECNICA E PROFESSIONALE (Organizzazione RAB SRL:via Crocifisso 51, 00165 Rome Italy:011 39 6 632595, 011 39 6 6381177) pp. - - issn: 0535-899X - wos: (0) - scopus: (0)

2108/52095 - 1993 - Analisi all'instabilità di giunti a T per uso automobilistico
Pezzuti, Eugenio; Brutti, Carlo; Vullo, Vincenzo - 01 - Articolo su rivista
paper: ATA (Associazione Technica Automob:Strada Torino 32, 10043 Orbassano to Italy:011 39 11 9080401, EMAIL: paola.reita.crf.it, Fax: 011 39 011 9080400) pp. 464-469 - issn: 0001-2661 - wos: (0) - scopus: (0)

2108/52094 - 1992 - Fatigue life prediction for tubolar threaded joints
Pezzuti, Eugenio; Brutti, Carlo - 02 - Intervento a convegno
conference: IITT, MAT-TEC 92 (GRENOBLE (FR))

2108/50631 - 1990 - Valutazione delle tensioni termiche in un nuovo tipo di sico freno ferroviario
Pezzuti, Eugenio; Missori, Severino - 01 - Articolo su rivista
paper: ORGANI DI TRASMISSIONE (Tecniche Nuove SPA:via Eritrea 21, I 20157 Milan Italy:011 39 02 39090241, INTERNET: http://www.tecnichenuove.com, Fax: 011 39 02 39090335) pp. - - issn: 0030-4905 - wos: (0) - scopus: (0)

2108/21921 - 1990 - CAD e normativa: un’esperienza didattica
Strollo, Rodolfo Maria; Pezzuti, Eugenio - 01 - Articolo su rivista
paper: ISTRUZIONE TECNICA E PROFESSIONALE (Organizzazione RAB SRL:via Crocifisso 51, 00165 Rome Italy:011 39 6 632595, 011 39 6 6381177) pp. 38-43 - issn: 0535-899X - wos: (0) - scopus: (0)

2108/49447 - 1990 - Stress analysis in spot welded and laser welded T-joints in cold formed shell
Pezzuti, Eugenio; Vullo, Vincenzo; Brutti, Carlo - 02 - Intervento a convegno
conference: ICED 1990 (Dubrovnik)

2108/49446 - 1990 - Static behaviour of shafts with tranversal crack subjected to elastic plastic stress
Pezzuti, Eugenio; Brutti, Carlo; Salvini, Pietro; Vullo, Vincenzo - 02 - Intervento a convegno
conference: Inter. Machinery and Monitoring Conference (Los Angeles, California)

2108/52092 - 1990 - CAD e normativa: un'esperienza didattica
Pezzuti, Eugenio; Strollo, Rodolfo Maria - 01 - Articolo su rivista
paper: ISTRUZIONE TECNICA E PROFESSIONALE (Organizzazione RAB SRL:via Crocifisso 51, 00165 Rome Italy:011 39 6 632595, 011 39 6 6381177) pp. 38-43 - issn: 0535-899X - wos: (0) - scopus: (0)

2108/49445 - 1988 - Rigidezza flessionale di alberi con cricche trasversali
Pezzuti, Eugenio; Brutti, Carlo - 01 - Articolo su rivista
paper: ORGANI DI TRASMISSIONE (Tecniche Nuove SPA:via Eritrea 21, I 20157 Milan Italy:011 39 02 39090241, INTERNET: http://www.tecnichenuove.com, Fax: 011 39 02 39090335) pp. 36-44 - issn: 0030-4905 - wos: (0) - scopus: (0)

2108/49444 - 1988 - Evaluation of fatigue lifetime of railway brake disk
Pezzuti, Eugenio; Missori, Severino - 02 - Intervento a convegno
conference: Fatigue And stress of engineering materials and components (Londra)

2108/49443 - 1987 - L'assonometria esplosa come metodo operativo di ausilio nella didattica del disegno di macchine e di meccanismi
Pezzuti, Eugenio; Strollo, Rodolfo Maria - 01 - Articolo su rivista
paper: ISTRUZIONE TECNICA E PROFESSIONALE (Organizzazione RAB SRL:via Crocifisso 51, 00165 Rome Italy:011 39 6 632595, 011 39 6 6381177) pp. 150-161 - issn: 0535-899X - wos: (0) - scopus: (0)

2108/49442 - 1987 - Il rilievo di meccanismi per una metodologia didattica nell'insegnamento del disegno meccanico
Pezzuti, Eugenio; Strollo, Rodolfo Maria - 01 - Articolo su rivista
paper: ISTRUZIONE TECNICA E PROFESSIONALE (Organizzazione RAB SRL:via Crocifisso 51, 00165 Rome Italy:011 39 6 632595, 011 39 6 6381177) pp. 52-61 - issn: 0535-899X - wos: (0) - scopus: (0)

2108/20156 - 1987 - Il rilievo di meccanismi per una metodologia didattica nell’insegnamento del disegno meccanico
Strollo, Rodolfo Maria; Pezzuti, Eugenio - 01 - Articolo su rivista
paper: ISTRUZIONE TECNICA E PROFESSIONALE (Organizzazione RAB SRL:via Crocifisso 51, 00165 Rome Italy:011 39 6 632595, 011 39 6 6381177) pp. 52-61 - issn: 0535-899X - wos: (0) - scopus: (0)

Università degli Studi di Roma "Tor Vergata" - Via Cracovia, 50, 00133 Roma RM